| ArticleName |
Systematization of the process of forming of shape and planeness for thin sheet steel at Magnitogorsk Integrated Metallurgical Works |
| ArticleAuthorData |
Ph.D., Docent P. P. Poletskov, Chair of Metal Forming, Magnitogorsk State Technical University named after G. I. Nosov; omd@magtu.ru. In the work took part: S. A. Las'kov, V. V. Galkin, I. V. Kazakov, A. G. Mamay, O. V. Kazakov, V. Yu. Perepelkin, R. G. Selivanov, A. P. Polyak, E. Yu. Kozhushkov, R. I. Abdulbarov, A. P. Stetsurenko, O. V. Sinitskiy. |
| Abstract |
Until present time, conventional approaches have been used in the problems of forming shape and planeness of thin sheet steel; these approaches were based on the effect on such parameters using accumulated experience of technologists. Such situation contradicted to the statements of ISO standards (9000 series) and TQM concept, required through integrated quality management and documentation for all processes. The measures undertaken at Magnitogorsk Integrated Metallurgical Works together with Magnitogorsk State Technical University allowed to systematize forming process of shape and planeness at the main sheet rolling mills and to obtain complex technical and technological effect. |
| References |
1. Gladyshev S. A. and etc. Upravlenie kachestvom: uchebnoe posobie: V 2-kh t (Quality management: textbook: in 2 vol.). Staryy Oskol: TNT, 2008.
2. Salganik V. M., Poletskov P. P. Modelirovanie deformatsiy i nagruzok valkovoy sistemy kvarto i povyshenie kachestva listovogo prokata po profilyu. Monografiya (Simulation of deformation and loads of roll system of quartos and improvement of quality of sheet rolled products on the profile. Monograph.). Magnitogorsk: Magnitogorsk State Technical University named after G. I. Nosov, 2009. 133 p.
3. Salganik V. M., Poletskov P. P., Sinitskiy O. V. and etc. Povyshenie ploskostnosti shirokikh polos na stane 2500 goryachey prokatki MMK v usloviyakh preimushchestvennogo proizvodstva uzkikh. Trudy V Kongressa prokatchikov, g. Cherepovets (Increase the accuracy of wide strip rolling mill 2500 of hot rolling of MMK in the conditions of the preemptive production of narrow. Proc. of Vth Congress of rollers). Cherepovets, 21-24 November, 2003. Chermetinformatsiya. 2004. pp. 48–51.
4. Salganik V. M., Poletskov P. P., Kukhta Yu. B. and etc. Stal' - Steel. 2008. No. 7. pp. 63–65.
5. Salganik V. M., Poletskov P. P., Nosov V. L., Galkin V. V. Uluchshenie ploskostnosti shirokikh polos na stane 2500 goryachey prokatki OAO "MMK". Materialy mezhzavodskoy shkoly po obmenu proizvodstvennym opytom. (The improvement of the flatness of broad bands on the camp of the 2,500 mm hot-rolling mill of OJSC "MMK". Materials of interplant school on an exchange of work experience). Vol. 6. May-June 2004.
6. Salganik V. M., Poletskov P. P., Sinitskiy O. V., Zhludov V. V. Sovershenstvovanie tekhnologii shirokopolosnoy goryachey prokatki dlya uluchsheniya poperechnogo profilya prokata. Trudy VI Kongressa prokatchikov (Improvement of the technology of strip hot rolling mill for the improvement of the cross-section rolled. Proceedings of the VI Congress of the rollers). Lipetsk, 2005.
7. Salganik V. M., Poletskov P. P., Sinitskiy O. V. and etc. Analiz tekhnologicheskikh vozmozhnostey ShSGP 2000 OAO «MMK» po proizvodstvu podkata dlya zhesti dvoynoy shiriny s trebuemym poperechnym profilem. Materialy 63-y nauch.-tekhn. konferentsii po itogam nauchno-issledovatel'skikh rabot za 2003–2004 gg. Sb. dokl. T. 1 (The analysis of the technological opportunities ShSGP 2000 OJSC "MMK" on production of slab for tin double the width of the transverse profile. Materials of the 63th sc.-techn. Conf. on the results of scientific-research work for 2003-2004. Coll. dokl. Vol. 1). Magnitogorsk: Magnitogorsk State Technical University, 2004. pp. 22-26.
8. Poletskov P. P., Stetsurenko A. P., Sevast'yanov A. G. Sovershenstvovanie tekhnologii v OAO «MMK» (The improvement of technology in OJSC "MMK"). Magnitogorsk. 2008. Vol. 12. pp. 303–305.
9. Salganik V. M., Poletskov P. P., Kukhta Yu. B., Egorova L. G. Vestnik MGTU im. G. I. Nosova - Journal of the Magnitogorsk Technical State University named after G. I. Nosov. 2010. No. 1. pp. 59–62. |
