• Acquire
Hide↑
Journals →  Tsvetnye Metally →  2011 →  #7 →  Back

Metal processing
ArticleName Silicon influence on crystallization character and hot-tearing tendency of hot-resistant casting aluminium alloy as AN2ZhMts
ArticleAuthor Belov N. A., Sannikov A. V., Mishurov S. S., Belov V. D.
ArticleAuthorData N. A. Belov, Professor, e-mail: nikolay-belov@yandex.ru; A. V. Sannikov, Candidate for a Master's Degree; S. S. Mishurov, Deputy Head of Department, Engineering Centre “Innovation casting technologies and materials”; V. D. Belov, Head of Technologies of Casting Processes Department, National University of Science and Technology “MISIS”.
Abstract

The parameters of crystallization for alluminium alloys of Al—Ni—Fe—Mn—Si system as applied to sparingly alloyed ANZhMts alloy have been calculated, using Thermo-Calc program. It has been shown that silicon addition hardly increase crystallization interval, in nonequilibrium conditions in particular. Negative silicon influence on hot-tearing of AN2ZhMts alloy has been defined. It has been conditioned by free-melting eutectic formation.
keywords Casting aluminium alloy, alloy, phase composition, crystallization, hot-tearing, program, parameters.
References

1. Alyuminiy. Svoystva i fizicheskoe metallovedenie : spravochnik : per. s angl. (Aluminium. Properties and physical metal sciences : reference book, Trans. from English). Ed.U. U. Entoni, F. R. Eliot, M. D. Boll. Moscow : Metallurgiya, 1989. 324 p.

2. Polmear I. J. Light Metals : From Traditional Alloys to Nanocrystals : 4th ed. Elsevier, 2006. 421 p.

3. Mondolfo L. F. Struktura i svoystva splavov : per. s angl (Structure and Properties of Alloys. Trans. from English). Moscow : Metallurgiya, 1979. 640 p.

4. Promyshlennye alyuminievye splavy : spravochnik (Industrial aluminium alloys : reference book). Ed. S. G. Alieva, M. B. Altman. Moscow : Metallurgiya, 1984. 528 p.

5. Zolotorevskiy V. S., Belov N. A. Metallovedenie liteynykh alyuminievykh splavov (Metal science of light alloys). Moscow : National University of Science and Technology «MISIS», 2005. 376 p.

6. Belov N. A. J. Advanced Mater. 1994. No. 1 (4). pp. 321–329.

7. Pat. 2001145 RF. Liteynyy splav na osnove alyuminiya (Casting alloy on aluminium base). Belov N. A. ; assert. 24.12.91 ; Publ. 15.10.93.

8. Pat. 2001147 RF. Liteynyy splav na osnove alyuminiya AN6T3 (Casring alloy on aluminium base) Belov N. A. ; assert. 30.01.92 ; Publ. 15.10.1993.

9. Belov N. A., Zolotorevskiy V. S. Tsvetnye Metally – Non-ferrous Metals. 2003. No. 2. pp. 99–105.

10. Belov N. A., Alabin A. N. Perspektivnye alyuminievye splavy s povyshennoy zharoprochnostyu dlya armaturostroeniya kak vozmozhnaya alternativa stalyam i chugunam (Prospective aluminium alloys with raising high-temperature strength for fitting construction as possible alternative of steel and cast iron). Armaturostroenie - Fitting Construction. 2010. No. 2.

11. Plavka i lite alyuminievykh splavov : spravochnik (Melting and casting of aluminium alloys: reference book) Ed. V. I. Dobatkina. Moscow : Metallurgiya, 1970. 416 p.

12. Novikov I. I. Goryachelomkost tsvetnykh metallov i splavov (Hot-tearing tendency of non-ferrous metals and alloys). Moscow : Nauka, 1966. 299 p.

13. Diagrammy sostoyaniya sistem na osnove alyuminiya i magniya : spravochnik (Constitutional diagrams of systems on the base of aluminium and magnesium : reference book) Ed. M. E. Drits, N. R. Bochvar. Moscow : Nauka, 1977. 228 p.

14. Belov N. A. Fazovyy sostav promyshlennykh i perspektivnykh alyuminievykh splavov (Phase composition of industrial and prospective aluminium alloys). Moscow : National University of Science and Technology «MISIS», 2010. 511 p.
Language of full-text russian
Full content Buy
Back