Journals →  Tsvetnye Metally →  2012 →  #2 →  Back

HEAVY NON-FERROUS METALS
ArticleName Researching of dynamic viscosity of high-copper slag melts
ArticleAuthor Lukavyy S. L., Fedorov A. N., Khabiev M. P., Khabiev R. P., Min M. G.
ArticleAuthorData

The National University of Science and Technology “MISiS”

S. L. Lukavyy, Non-ferrous Metals and Gold Department Assistant, e-mail: lukavyy@gmail.com
A. N. Fedorov, Non-ferrous Metals and Gold Department Professor
M. P. Khabiev, Postgraduate Student
R. P. Khabiev, Non-ferrous Metals and Gold Department Assistant
M. G. Min, Postgraduate Student

Abstract

Method of high-temperature measure of VISCOSITY of chemically active slags of “copper oxide — wustite — silica – calcium oxide” system is developed. Experimental studies has been concluded in order to determine slag’s viscosity with high contain of copper (9.7–27.2%) in 1200–1400 оC temperature interval. Researches show, that viscosity’s value of researching synthetic slags has inreverse dependence with copper concentration. High-copper slags, which are in the lime concentration range from 7 to 10% have the least viscous (0.1–0.4 Pa·s at 1250 оС). At the temperatures higher than 1300 оС the interval of compositions with lower viscosity widens to copper contain of 10–15%. Temperature parameters of crystallization’s beginning as for cindery melt of researching compositions have been determined. Temperature of crystallization’s beginning of slag melt’s components decreases with increasing of copper content in slags, and reaches 1170 оC at the 27% copper concentration. Regression equals has been obtained, which describe synthetic slag melt’s viscosity depended on copper concentration (10–27%) and temperature (1200–1400 оС), and allow to calculate slag’s dynamic viscosity with pinpoint accuracy. Obtained data are topical for developing continuous converting technology of copper matte via Vanukov’s process.

keywords Viscosity, copper oxide, slag, Vanukov process, copper, temperature of crystallization, continuous converting, regression equation, flash smelting
References

1. Komkov A. A., Bystrov V. P., Nikolaev A. G. Tsvetnye Metally – Non-ferrous Metals. 2004. No. 7. pp. 17–21.
2. Galnbek A. A. Nepreryvnoe konvertirovanie shteynov (Uninterrupted mattle conversion). Moscow, 1993. 86 p.
3. GOST R 54310–2011. Med chernovaya. Tekhnicheskie usloviya (Blister copper. Specification). Int. 2011-09-01. Moscow, 2011.

4. Fedorov A. N., Khabiev M. P., Khabiev R. P., Lukavyy S. L. Tsvetnye Metally – Non-ferrous Metals. 2011. No. 7. pp. 21–23.
5. Komkov A. A., Bystrov V. P., Fedorov A. N. Tsvetnye Metally – Non-ferrous Metals. 2006. No. 9. pp. 11–15.
6. Novozhilov A. B., Fedorov A. N., Pavlov R. A. Tsvetnye Metally – Non-ferrous Metals. 1998. No. 3. pp. 17–21.
7. Pavlov R. A., Pavlov A. V., Fedorov A. N. Tsvetnye Metally – Non-ferrous Metals. 2000. No. 4. pp. 76–79.
8. Linchevskiy B. V. Tekhnika metallurgicheskogo eksperimenta. 2-e izd. (Metallurgical experiment technique. 2nd ed.). Moscow, 1979. 256 p.
9. Kolosov A. G., Stupin A. V., Fedorov A. N., Vanyukov A. V. Tsvetnye Metally – Non-ferrous Metals. 1987. No. 3. pp. 44–47.

Language of full-text russian
Full content Buy
Back