CIS Iron and Steel Review
| Preparation of raw materials | |
| Название | Study of possibility of magnetic hydrocyclone use in concentration cycles of oxidized ferriferous quartzites |
| Авторы | V. V. Lvov, T. N. Aleksandrova, V. B. Kuskov, A. E. Pelevin |
| Информация об авторах | St. Petersburg Mining University (St. Petersburg, Russia): V. V. Lvov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Lvov_VV@pers.spmi.ru
Ural State Mining University (Ekaterinburg, Russia): |
| Ironmaking | |
| Название | Comprehensive index of compound blast furnace smelting |
| Авторы | P. I. Chernousov, A. E. Karpalev, A. V. Kramar, V. O. Podusovskiy |
| Информация об авторах | National University of Science and Technology “MISiS” (Moscow, Russia): P. I. Chernousov, Cand. Eng., Associate Prof., e-mail: p.chernou@yandex.ru |
| Название | Investigation of factors affecting the safety of a blast furnace operation |
| Авторы | E. P. Pototskiy, T. S. Lazareva |
| Информация об авторах | National University of Science and Technology “MISiS” (Moscow, Russia): E. P. Pototskiy, Cand. Eng., Associate Prof., Dept. of Technosphere Safety, e-mail: pep@disto.misis.ru |
| Casting and Foundry | |
| Название | Use of experimental casting equipment for research of castings crystallized through individual cooling procedures |
| Авторы | N. I. Gabelchenko, A. A. Belov, N. A. Kidalov, S. R. Polyak |
| Информация об авторах | Volgograd State Technical University (Volgograd, Russia): N. I. Gabelchenko, Cand. Eng., Associate Prof., Dept. “Machines and technology of casting production”
M. D. Bezmogorychnyi participated in this work. |
| Rolling and other Metal Forming Processes | |
| Название | Development of new composition for sHSS steel used for hot rolling mill rolls at Magnitogorsk Iron and Steel Works |
| Авторы | V. M. Kolokoltsev, N. A. Feoktistov, A. S. Savinov, E. V. Skripkin |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): V. M. Kolokoltsev, Dr. Eng., Prof., President of the University, e-mail: kwm@magtu.ru |
| Название | Providing steel with an approximate application of the mechanical properties of wire rod 5.5-6.5 mm from sreel grades 70-75 based on a conventional twin of the Stelmor process |
| Авторы | A. B. Moller, O. N. Tulupov, S. A. Levandovskiy, D. A. Nazarov |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): A. B. Moller, Dr. Eng., Prof., Head of the Dept. of Materials Processing Technologies, e-mail: amoller@mail.ru |
| Название | Minimization of dies volume using uniform distribution of hollows in the conditions of multi-cycle fatigue dependence on temperature |
| Автор | I. K. Andrianov |
| Информация об авторе | Komsomolsk-na-Amure State University (Komsomolsk-na-Amure, Russia): I. K. Andrianov, Cand. Eng., Associate Prof., Institute of Machine Science and Metallurgy, Far Eastern Branch of RAS, e-mail: ivan_andrianov_90@mail.ru |
| Название | On calculation of stress-strain state of steel closed ropes in extension and twisting. Part 2. Influence of torsion on the stress-strain state of closed rope |
| Авторы | V. F. Danenko, L. M. Gurevich |
| Информация об авторах | Volgograd State Technical University (Volgograd, Russia): V. F. Danenko, Cand. Eng., Associate Prof., e-mail: omd@vstu.ru |
| Tubemaking | |
| Название | Modelling of the sheet forming while 3-roller bending process |
| Авторы | G. P. Zhigulev, M. M. Skripalenko, V. A. Fadeev, M. N. Skripalenko, V. N. Danilin |
| Информация об авторах | DKN-T JSC (Moscow, Russia): G. P. Zhigulev, Cand. Eng., e-mail: aldebaran2000@yandex.ru
National University of Science and Technology “MISiS” (Moscow, Russia): |
| Название | Analytical calculation of sheet curvature in four-roll mills at tubes production |
| Автор | V. N. Shinkin |
| Информация об авторе | National University of Science and Technology “MISiS” (Moscow, Russia): V. N. Shinkin, Dr. Phys.-Math., Professor, e-mail: shinkin-korolev@yandex.ru |
| Coatings application and Corrosion protection | |
| Название | Features and regularities in formation of diffusion nickel-copper coatings on steels in the medium of low-melting liquid-metal solutions |
| Авторы | A. G. Sokolov, E. E. Bobylev |
| Информация об авторах | Kuban State Technological University (Krasnodar, Russia): A. G. Sokolov, Dr. Eng., Prof. |
| Название | Technological basis for the process of application of diffusion coatings in liquid metal melts with use of electric furnaces with air atmosphere |
| Авторы | N. A. Serdiuk, E. I. Pryakhin, A. V. Sivenkov |
| Информация об авторах | St. Petersburg Mining University (St. Petersburg, Russia): N. A. Serdiuk, Post-graduate Student |
| Metal Science and Metallography | |
| Название | TRIP steels: the features of chemical composition and structure, prospects of application (overview) |
| Авторы | D. A. Gorlenko, D. V. Konstantinov, M. A. Polyakova, M. Dabalá |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): D. A. Gorlenko, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: d.gorlenko@magtu.ru
University of Padova (Padova, Italy):
A. G. Korchunov, Dr. Eng., Prof., Head of the Dept. of Designing and Operation of Metallurgical Equipment participated in this work. |
| Название | Diagram of the phase composition of the Fe - Si - Al system and its isothermal sections |
| Авторы | A. A. Akberdin, A. S. Kim, A. S. Orlov, R. B. Sultangaziev |
| Информация об авторах | Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan): A. A. Akberdin, Dr. Eng., Prof., Head of the Bor laboratory |
| Название | Structure, defect substructure and fracture surface of low-carbon alloy steel welds |
| Авторы | N. A. Kozyrev, R. E. Kryukov, V. E. Gromov, Yu. A. Shlyarova |
| Информация об авторах | Siberian State Industrial University (Novokuznetsk, Russia): N. A. Kozyrev, Dr. Eng., Prof., Head of the Dept. of Materials Science, Foundry and Welding Production |
| Название | Determination of rail steel structural elements via the method of atomic force microscopy |
| Авторы | A. E. Balanovskiy, M. G. Shtaiger, V. V. Kondratyev, A. I. Karlina |
| Информация об авторах | Irkutsk National Research Technical University (Irkutsk, Russia): A. E. Balanovskiy, Cand. Eng., Associate Prof.
Mechel Steel Management Company (Moscow, Russia):
A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia):
Moscow State University of Civil Engineering (Moscow, Russia): |
| Powder Metallurgy | |
| Название | Structure and properties of additive products manufactured from electroerosion powders |
| Авторы | E. V. Ageev, E. V. Ageeva, A. Yu. Altukhov |
| Информация об авторах | South-West State University (Kursk, Russia): E. V. Ageev, Dr. Eng., Associate Prof., Dept. “Technology of materials and transport”, Head of Scientific Education Center “Powder metallurgy and functional coatings”, e-mail: ageev-ev@mail.ru |
| Refractory materials | |
| Название | Study of aluminosilicate refractories after operation in the presence of fluorine-containing wastes |
| Авторы | E. A. Sidorina, A. Z. Isagulov, I. D. Kashcheev, K. G. Zemlyanoy |
| Информация об авторах | Karaganda Technical University named after Abylkas Saginov, Karaganda, Republic of Kazakhstan: E. A. Sidorina, Doctoral Candidate, e-mail: elena.sidorina.78@mail.ru
Ural Federal University, Ekaterinburg, Russian Federation: I. D. Kashcheev, Dr. Eng., Prof., Dept. of Chemical Technology of Ceramics and Refractories, Institute of New Metallurgical Technologies |
| Quality of Products | |
| Название | On necessity of taking into account statistical nature of the objects using Big Data in metallurgy |
| Авторы | A. V. Kudrya, E. A. Sokolovskaya, D. F. Kodirov, E. V. Bosov, G. V. Kotishevskiy |
| Информация об авторах | National University of Science and Technology (Moscow, Russia): A. V. Kudrya, Dr. Eng., Prof., e-mail: AVKudrya@misis.ru
“Novye tekhnologii kachestva” (Moscow, Russia): |
| Power Engineering | |
| Название | Primary diagnosis of energy efficiency in an integrated steel plant, based on intensive energy-saving methodology. Part 2 |
| Авторы | S. V. Kartavtsev, E. G. Neshporenko, S. V. Matveev |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): S. V. Kartavtsev, Dr. Eng., Prof., Dept. of Heat Engineering and Power Engineering Systems, e-mail: kartavzw@mail.ru |
| Ecology and Recycling | |
| Название | Thermophysical processes in dry granulation of metallurgical slags |
| Авторы | S. V. Panchenko, M. I. Dli, M. V. Chernovalova, N. S. Kulyasov |
| Информация об авторах | Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia): S. V. Panchenko, Dr. Eng., Prof., Dept. of Physics, e-mail: tan_pan@inbox.ru
Plekhanov Russian University of Economics (Moscow, Russia): |
