Chernye Metally
The "Chernye Metally" journal No. 9-2022 was published, which is mainly dedicated to the 80th anniversary of the chair for Metal Technology and Aviation Materials Science of the Samara National Research University named after S.P. Korolev. The jubilee collection contains a historical article, as well as the main developments of the chair's specialists, telling about the study of transverse cracks in a welded joint of the main gas pipeline, about causes of wear and destruction of the working tool made of Kh12MF steel, as well as the effect of long-term thermal cycling loads on changes in properties and structure of SCh20 cast iron.
The number is headed by "Agglomeration" section. Specialists of JSC "Tulachermet" considered increasing the strength of the sinter by improving the charge pelletization by adding polymer binders. In the same section, the authors from St. Petersburg Mining University presented a review of scientific and technical literature on the use of petroleum coking additives as a partial replacement for scarce coking coals.
As usual, the journal presents articles on challenges of metallurgy and physics of metals, which touched upon the issues of the influence of long-term operation on changes in the structure of a heat-resistant alloy using the example of a pipe of a pyrolysis furnace coil, on non-contact deformation during pendulum surface plastic deformation of structural steel, and also on the role of carbonitrides in the formation of austenite grains during hot rolling of pipe steel.
The section on environmental issues is of interest. I. V. Butorina and M. V. Butorina considered the best available technologies to reduce noise in the iron and steel industry, which is the cause of 30% of occupational diseases in the industry. In another article by NUST MISiS specialists, using the example of a blast furnace at PJSC NLMK, a unique method for calculating and building a three-dimensional model is presented for maximum assessment and prediction of danger in the external zone of the enterprise`s influence.
The same issue publishes congratulations to Nikolai Nikolaevich Gugis, the President of the IPO Association of Rollermen, on his 80th birthday, which comes out on the eve of the next congress of rollermen in Moscow in October.
Please find more details below, or order your printed or electronic version of the Journal.
JSC Tulachermet, Tula, Russia:
D. V. Fedorenko, Chief Engineer, e-mail: fedorenko_dv@metholding.com
A. A. Vorotyntsev, Deputy Chief Engineer for Production, e-mail: vorotynthev_aa@metholding.com
E. M. Shcheglov, Head of the Production and Technical Department, e-mail: scheglov_em@metholding.com
V. I. Iskalin, First Category Engineer, Central Laboratory of Chemical-Technological and Technical Control, e-mail: iskalin_vi@metholding.com
Saint Petersburg Mining University, St. Petersburg, Russia:
A. I. Nasifullina, Researcher, Scientific Center “Issues of Processing Mineral and Technogenic Resources”, e-mail: nasifullina.alsu@mail.ru
R. R. Gabdulkhakov, Scientific Researcher, Scientific Center “Issues of Processing Mineral and Technogenic Resources”, e-mail: renat18061995@gmail.com
V. A. Rudko, Cand. Eng., Executive Director of the Scientific Center “Issues of Processing Mineral and Technogenic Resources”, e-mail: rva1993@mail.ru
I. N. Pyagay, Dr. Eng., Senior Researcher, Director of the Scientific Center “Issues of Processing Mineral and Technogenic Resources”, e-mail: igor-pya@yandex.ru
Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia1 ; M. N. Mikheev Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia2:
Yu. N. Loginov, Dr. Eng., Prof., Dept. of Metal Forming1, Leading Researcher2, e-mail: j.n.loginov@urfu.ru
Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia1 ; NLMK-Metiz, Berezovsky, Russia2:
S. K. Grekhov, Postgraduate Student, Dept. of Metal Forming1, Leading Process Engineer2, e-mail: g.svyat@yandex.ru
JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia.
A. V. Vydrin, Dr. Eng., Chief Researcher, Laboratory of Longitudinal Rolling
D. N. Lysov, Head of the Dept. of Economic Research, e-mail: lab-pio@rosniti.ru
JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia1 ; South Ural State University, Chelyabinsk, Russia2:
E. N. Kondratiev, Junior Researcher, Dept. of Economic Research1, Postgraduate Student, Dept. of Economics and Finance2, e-mail: kondratjev@rosniti.ru
JSC Taganrog Metallurgical Plant, Taganrog, Russia:
A. A. Puzikov, Head of the Bureau of Rationing of the Technical Department
Gazprom Transgaz Samara, Samara, Russia:
D. V. Zhukov, Head of the Database Maintenance Group
Samara National Research University named after Academician S. P. Korolev, Samara, Russia:
A. A. Melnikov, Cand. Eng., Associate Professor, Dept. of Metal Technology and Aviation Materials Science
Samara National Research University named after Academician S. P. Korolev, Samara, Russia1 ; Siberian State Industrial University, Novokuznetsk, Russia2:
S. V. Konovalov, Dr. Eng., Prof., Chief Researcher, ONIL-4 Laboratory1, Vice-Rector for Research and Innovation2, e-mail: Konovalov@sibsiu.ru
Research and Development Manufacturing Enterprise “Valma”, Samara, Russia:
M. O. Dmitrieva, Engineer
Samara National Research University named after Academician S. P. Korolev, Samara, Russia:
O. S. Bondareva, Cand. Eng., Associate Prof., Dept. of Metal Technology and Aviation Materials Science, e-mail: osbond@yandex.ru
O. S. Dobychyna, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science
A. A. Melnikov, Cand. Eng., Associate Prof., Dept. of Metal Technology and Aviation Materials Science
Samara National Research University named after Academician S. P. Korolev, Samara, Russia1 ; Siberian State Industrial University, Novokuznetsk, Russia2:
S. V. Konovalov, Dr. Eng., Prof., Chief Researcher, ONIL-4 Laboratory1, Vice-Rector for Research and Innovation2, e-mail: Konovalov@sibsiu.ru
Samara National Research University named after Academician S. P. Korolev, Samara Russia:
K. K. Chaplygin, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science, e-mail: chapkostya96@mail.ru
S. V. Voronin, Cand. Eng., Associate Prof., Dept. of Metal Technology and Aviation Materials Science
Volgograd State Technical University, Volgograd, Russia:
V. F. Petrova, Cand. Eng., Associate Prof., Dept. of Materials Technology, e-mail: tecmat@vstu.ru
E. A. Pozhilova, Undergraduate Student, Dept. of Materials Technology, e-mail: tecmat@vstu.ru
Volgograd State Technical University, Volgograd, Russia1 ; EKSPERTIZA Ltd., Volgograd, Russia2:
S. O. Gevlich, Cand. Eng., Associate Prof., Dept. of Materials Technology1, Technical Director2, e-mail: sgevlich@mail.ru
Irkutsk National Research Technical University, Irkutsk, Russia:
S. A. Zaides, Dr. Eng., Prof., Dept. of Materials Science, Welding and Additive Technologies, e-mail: zsa@istu.edu
Ho Ming Quan, Postgraduate Student, Dept. of Materials Science, Welding and Additive Technologies, e-mail: minhquanho2605@gmail.com
Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia:
N. G. Kolbasnikov, Dr. Eng., Prof., Scientific and Educational Center "Research and Modeling of Materials", e-mail: nikolay.kolbasnikov@gmail.com
N. V. Zhukov, Leading Specialist, Scientific and Technical Complex "New Materials and Technologies", e-mail: zhukov_nv@spbstu.ru
S. A. Kuzin, Engineer of the laboratory "Research and modeling of the structure and properties of metallic materials", e-mail: kuzinsta@yandex.ru
V. S. Teteryatnikov, Engineer of the laboratory "Research and Modeling of the structure and properties of metallic materials", e-mail: vlad.teteryatnikov@rambler.ru
Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia:
I. V. Butorina, Dr. Eng., Prof., e-mail: butorina_irina@mail.ru
Baltic State Technical University «Voenmeh» named after D. F. Ustinov, St. Petersburg, Russia:
M. V. Butorina, Dr. Eng., Prof., e-mail: marina_butorina@inbox.ru
National University of Science and Technology “MISIS”, Moscow, Russia:
O. S. Nurzhanov, Postgraduate Student, Dept. of Energy Efficient and Resource Saving Technologies, e-mail: za852@yandex.ru
A. L. Petelin, Dr. Phys.-Math., Prof., Dept. of Energy Efficient and Resource Saving Technologies
A. S. Nurzhanov, Postgraduate Student, Dept. of Energy Efficient and Resource Saving Technologies
L. A. Polulyakh, Cand. Eng., Associate Prof., Dept. of Energy Efficient and Resource Saving Technologies