• Acquire

Chernye Metally

Cast Iron Production
ArticleName
Alloying of ICh280Kh29NL and ICh330Kh17L grades cast iron to improve quality
ArticleAuthors
A. A. Zhumaev, Yu. N. Mansurov, V. Yu. Kulikov, Kh. I. Akhmedov
ArticleAuthorsData

Navoi State Mining and Technological University (Navoi, Uzbekistan):

A. A. Zhumaev, Dr. Eng., Associate Prof., e-mail: ahmadjon_jumayev@mail.ru

Kh. I. Akhmedov, Cand. Eng., Associate Prof.

 

Tashkent State Transport University (Tashkent, Uzbekistan):
Yu. N. Mansurov, Dr. Eng., Professor, e-mail: yulbarsmans@gmail.com

 

Abylkas Saginov Karaganda Technical University (Karaganda, Kazakhstan):

V. Yu. Kulikov, Cand. Eng., Professor

Steel Production
ArticleName
Decarbonization of steelmaking from the standpoint of the electronic theory of metal reduction
ArticleAuthors
V. E. Roshchin, A. D. Drozin, P. A. Gamov, K. I. Smirnov
ArticleAuthorsData

South Ural State University, Chelyabinsk, Russia:

V. E. Roshchin, Dr. Eng., Professor, Chief Researcher, “Hydrogen Technologies in Metallurgy” Laboratory, e-mail: roshchinve@susu.ru
A. D. Drozin, Dr. Eng., Professor, Leading Researcher, “Hydrogen Technologies in Metallurgy” Laboratory
P. A. Gamov, Cand. Eng., Associate Prof., Acting Head of the “Hydrogen Technologies in Metallurgy" Laboratory
K. I. Smirnov, Researcher, “Hydrogen Technologies in Metallurgy” Laboratory

Metal Rolling and Other Metal Processing Processes
ArticleName
Scientometric of topical directions increasing the efficiency for the process of rolling ingots and concast blooms from special steels prone to internal defect formation
ArticleAuthor
V. V. Brinza
ArticleAuthorData

V. V. Brinza, Dr. Eng., Independent Researcher, e-mail: viachbrinza@mail.ru

ArticleName
Investigation of surface strain hardening of the barrel of back-up rolls in the finishing group of a broadband hot rolling mill
ArticleAuthors
D. Yu. Ermushin, N. L. Bolobanova
ArticleAuthorsData

Cherepovets State University, Cherepovets, Russia:

D. Yu. Ermushin, Postgraduate Student, Dept. of Mathematical and Software Support of Computers, e-mail: diuermushin@chsu.ru

 

Cherepovets State University, Cherepovets, Russia1 ; RAS Institute of Metallurgy and Material Science named after A. A. Baikov, Moscow, Russia2:

N. L. Bolobanova, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Technological Equipment1, Doctoral Candidate2, e-mail: nlbolobanova@chsu.ru

ArticleName
Simulation of the cooling process during hardening of sheet steel in the conditions of the 5000 plate mill
ArticleAuthors
P. P. Poletskov, D. Yu. Alekseev, A. E. Gulin, D. G. Emaleeva
ArticleAuthorsData

Magnitogorsk State Technical University named after G. I. Nosov, Magnitogorsk, Russia:

P. P. Poletskov, Dr. Eng., Director of the Engineering Center of the Scientific and Innovation Sector
D. Yu. Alekseev, Engineer of the Engineering Center of the Scientific and Innovative Sector
A. E. Gulin, Cand. Eng., Senior Researcher, Engineering Center of the Scientific and Innovation Sector, e-mail: a.gulin@magtu.ru
D. G. Emaleeva, Cand. Eng., Junior Researcher, Engineering Center of the Scientific and Innovation Sector

ArticleName
Development of situation models for duration of production cycles of manufacturing finished rolled products. Message 2
ArticleAuthors
A. R. Fastykovsky, A. I. Musatova, S. M. Kulakov, N. V. Martyushev, A. I. Karlina
ArticleAuthorsData

Siberian State Industrial University (Russia, Novokuznetsk):

A. R. Fastykovsky, Dr. Eng., Associate Prof., Head of the EVRAZ ZSMK Dept. of Metal Processing and Metal Science, e-mail: fastikovsky@mail.ru
A. I. Musatova, Lecturer of the Institute of Additional Education, e-mail: musatova-ai@yandex.ru
S. M. Kulakov, Dr. Eng., Prof., Dept. of Automation and Information Systems, e-mail: kulakov-ais@mail.ru

 

Tomsk Polytechnic University (Tomsk, Russia):
N. V. Martyushev, Cand. Eng., Associate Prof., Dept. of Metal Science, e-mail: martjushev@tpu.ru

 

Moscow State University of Civil Engineering (Moscow, Russia):
A. I. Karlina, Cand. Eng., Researcher, e-mail: karlinat@mail.ru

ArticleName
Dependence of the hardness value on the intensity of stresses and deformations during cold forging
ArticleAuthors
E. A. Galaktionova, Le Chung Zung, Yu. K. Filippov, D. A. Gnevashev
ArticleAuthorsData

Moscow Polytechnic University, Moscow, Russia:

E. A. Galaktionova, Master’s Student, Dept. of Materials Forming and Additive Technologies, e-mail: ekgalaktionova1@mail.ru
Le Chung Zung, Postgraduate Student, Dept. of Materials Forming and Additive Technologies, e-mail: sea.lawyer.vn@gmail.com
Yu. K. Filippov, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: yulianf@mail.ru
D. A. Gnevashev, Cand. Eng., Associate Prof., Acting Head of Dept. of Materials Forming and Additive Technologies, e-mail: dengnevashev@mail.ru

Metallology and Metallography
ArticleName
Investigation of the distribution and microsegregation of alloying elements in structural low-alloy steels ingots
ArticleAuthors
M. V. Kirilichev, N. A. Zyuban, D. V. Rutsky, D. S. Tolstykh
ArticleAuthorsData

Volgograd State Technical University, Russia, Volgograd:

M. V. Kirilichev, Cand. Eng., Head of the Laboratory, Dept. of Technology of Materials, e-mail: tecmat@vstu.ru
N. A. Zyuban, Dr. Eng., Prof., Dept. of Technology of Materials, e-mail: tecmat49@vstu.ru
D. V. Rutsky, Cand. Eng., Associate Prof., Head of the Dept. of Technology of Materials, e-mail: drutskii@vstu.ru

 

National University of Science and Technology "MISiS", Russia, Moscow:
D. S. Tolstykh, Deputy Director of the Advanced Engineering School "Materials Science, Additive and End-to-End Technologies", e-mail: Tolstykh.DS@misis.ru

ArticleName
Technological features of surface alloying of metal products with Cr – Ni complexes in the medium of low-melting metal melts
ArticleAuthors
E. I. Pryakhin, A. V. Mikhailov, A. V. Sivenkov
ArticleAuthorsData

St. Petersburg Mining University, St. Petersburg, Russia:

E. I. Pryakhin, Dr. Eng., Professor, Head of the Dept. of Materials Science and Technology of Art Products, e-mail: e.p.mazernbc@yandex.ru
A. V. Mikhailov, Postgraduate Student, Dept. of Materials Science and Technology of Art Products, e-mail: s195084@stud.spmi.ru
A. V. Sivenkov, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology of Art Products, e-mail: sivenkov@mail.ru

ArticleName
Fe – 100% C diagram. Part 1. Basic contradictions of the Fe–Fe3C diagram
ArticleAuthor
S. V. Davydov
ArticleAuthorData

Bryansk State Technical University", Bryansk, Russia:

S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Technology of Materials, e-mail: fulleren_grafen@mail.ru

Foundry production
ArticleName
Softening of sand mixtures on a liquid-glass binder as a result of thermal-oxidative destruction of a combined carbon-containing additive. Part 2
ArticleAuthors
N. A. Kidalov, N. V. Belova, A. A. Belov, A. S. Adamova
ArticleAuthorsData

Volgograd State Technical University, Volgograd, Russia:
N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. of Machinery and Technology of Foundry (MTF)
N. V. Belova, Lecturer, Dept. of MTF
A. A. Belov, Cand. Eng., Lecturer, Dept. of MTF, e-mail: aa-belov@bk.ru
A. S. Adamova, Cand. Eng., Associate Prof., Dept. of MTF

Mechanical Engineering Technologies
ArticleName
Machinability of cutting of low-magnetic high-manganese steels
ArticleAuthors
M. A. Admakin, A. D. Khalimonenko, V. P. Zakharova, Nguen Van Dao
ArticleAuthorsData

St. Petersburg Mining University, St. Petersburg, Russia:

M. A. Admakin, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Admakin_MA@pers.spmi.ru
A. D. Khalimonenko, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Khalimonenko_AD@pers.spmi.ru
V. P. Zakharova, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: zakharova_vp@pers.spmi.ru
Nguyen Van Dao, Postgraduate Student, Dept. of Mechanical Engineering, e-mail: nguyenvandao091097@gmail.com