Chernye Metally

New developments in the field of metallurgy and metal science in the Siberian universities and scientific centers
ArticleName	Dynamics of the development of ferrous metallurgy in Russia in the late 19th – early 20th centuries. Part 1. Iron ores, pig iron, iron
ArticleAuthor	G. Yu. Boyarko
ArticleAuthorData	National Research Tomsk Polytechnic University (Tomsk, Russia) G. Yu. Boyarko, Dr. Eng., Prof., gub@tpu.ru
ArticleName	Determination of the effect of CCM`s tundish configuration on the refining of rail steel from non-metallic inclusions
ArticleAuthors	A. A. Umanskii, D. T. Feyler, R. A. Shevchenko, S. V. Feyler
ArticleAuthorsData	Siberian State Industrial University (Novokuznetsk, Russia) A. A. Umanskii, Dr. Eng., Associate Prof., Director of the Institute of Metallurgy and Materials Science, umanskii@bk.ru D. T. Feyler, Leading Engineer, Dept. of Ferrous Metallurgy and Chemical Engineering, feyler_dt@sibsiu.ru R. A. Shevchenko, Cand. Eng., Associate Prof., Dept. of Ferrous Metallurgy and Chemical Engineering, shefn1200@mail.ru S. V. Feyler, Cand. Eng., Associate Prof., Head of the Dept. of Ferrous Metallurgy and Chemical Engineering, feiler_sv@sibsiu.ru
ArticleName	Study of burn-on formation patterns on the surface of iron castings
ArticleAuthors	S. A. Khudonogov, T. R. Gilmanshina, I. V. Dubova, I. M. Fedotova
ArticleAuthorsData	Siberian Federal University (Krasnoyarsk, Russia) S. A. Khudonogov, Senior Lecturer, Dept. of Applied Mechanics, shudonogov@sfu-kras.ru T. R. Gilmanshina, Cand. Eng., Associate Prof., Dept. of Engineering Bachelor’s Programme, gtr1977@mail.ru I. V. Dubova, Cand. Eng., Associate Prof., Dept. of Fundamental Natural Science Education, idubova@sfu-kras.ru I. M. Fedotova, Cand. Phys.-Math., Associate Prof., Dept. of Applied Mathematics and Data Analysis, ifedotova@sfu-kras.ru
ArticleName	Comparison of vacuum induction casting and wire-arc method for obtaining CoCrFeMnNi alloys
ArticleAuthors	S. V. Konovalov, V. K. Drobyshev, I. A. Panchenko, E. M. Zapolskaya, A. R. Mikhno, V. M. Alzhev
ArticleAuthorsData	Siberian State Industrial University (Novokuznetsk, Russia) S. V. Konovalov, Dr. Eng., Vice-Rector for Research and Innovation, Head of the Department of Mechanics and Engineering, konovalov@sibsiu.ru V. K. Drobyshev, Researcher, Laboratory of Electron Microscopy and Image Processing, Postgraduate Student, Dept. of Metal Forming and Materials Science, EVRAZ ZSMK, drobyshev_v.k@mail.ru I. A. Panchenko, Cand. Eng., Head of Laboratory of Electron Microscopy and Image Processing, panchenko_ia@sibsiu.ru E. M. Zapolskaya, Cand. Eng., Senior Researcher, Laboratory of Electron Microscopy and Image Processing, vestnicsibgiu@sibsiu.ru A. R. Mikhno, Director of the Scientific and Production Center “Welding Processes and Technologies”, welding@sibsiu.ru V. M. Alzhev, Laboratory Assistant, Electron Microscopy and Image Processing Laboratory, alzhev_vm@sibsiu.ru
ArticleName	Study of pearlite transformation kinetics of high-carbon high-manganese 110G13Kh2BRL (Fe–1.1C–13Mn–2Cr ) steel after annealing at 550 °C
ArticleAuthors	Sh. Kh. Nguyen, M. A. Guryev, S. G. Ivanov, A. M. Guryev, M. N. Zenin, M. Shunchi
ArticleAuthorsData	Polzunov Altai State Technical University (Barnaul, Russia) Sh. Kh. Nguyen, Postgraduate Student, Dept. of Advanced Special Materials, syhaimta@gmail.com M. N. Zenin, Postgraduate Student, Dept. of Advanced Special Materials, mikhail.zenin.96@mail.ru Polzunov Altai State Technical University (Barnaul, Russia)¹ ; Zhejiang Brilliant Refrigeration Equipment Co., Ltd (Xingchang, China)² M. A. Guryev, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology¹, Technical Director², gurievma@mail.ru Altai State University (Barnaul, Russia)¹ ; Wuhan Textile University (Wuhan, China)² ; Innovation Center for Advanced Textile Technologies (Jianhu Laboratory) (Shaoxing, China)³ S. G. Ivanov, Dr. Eng., Prof., Dept. of Technosphere Safety and Analytical Chemistry¹, Leading Researcher², Head of the Advanced Materials Laboratory³, serg225582@yandex.ru Polzunov Altai State Technical University (Barnaul, Russia)¹ ; Altai State University (Barnaul, Russia)² A. M. Guryev, Dr. Eng., Prof., Dept. of Descriptive Geometry and Graphics¹, Leading Researcher², gurievam@mail.ru Wuhan Textile University (Wuhan, China)¹ ; Innovation Center for Advanced Textile Technologies (Jianhu Laboratory) (Shaoxing, China)² M. Shunchi, Head¹, Head of Advanced Equipment and Materials Direction², sqmei@wtu.edu.cn
ArticleName	The effect of temperature on changes in the mechanical and acoustic properties of low-carbon steel
ArticleAuthors	S. A. Barannikova, G. V. Shlyakhova
ArticleAuthorsData	Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences (Tomsk, Russia) S. A. Barannikova, Dr. Phys.-Math., Prof., Leading Researcher, bsa@ispms.ru G. V. Shlyakhova, Cand. Eng., Researcher, shgv@ispms.ru
ArticleName	Study of the microstructure and hardness of 20 grade low-carbon steel with a Ni-Co-Cr-W-Si + (B4C) alloy mixture by laser surface remelting
ArticleAuthors	R. Yu. Gusev, G. M. Mikhaylovsky, N. A. Astafieva, Kim Chol Son, A. E. Balanovsky
ArticleAuthorsData	Irkutsk National Research Technical University (Irkutsk, Russia) R. Yu. Gusev, Postgraduate Student, Dept. of Materials Science, Welding, and Additive Technologies, deltadota_99@mail.ru G. M. Mikhaylovsky, Postgraduate Student, Dept. of Materials Science, Welding, and Additive Technologies, dog7820038@gmail.com N. A. Astafieva, Cand. Eng., Associate Prof., Dept. of Materials Science, Welding, and Additive Technologies, anstella@mail.ru Kim Chol Son, Postgraduate Student, Dept. of Materials Science, Welding, and Additive Technologies, ivanov1992113@mail.ru A. E. Balanovsky, Cand. Eng., Associate Prof., Dept. of Materials Science, Welding, and Additive Technologies, balanovskiy@ex.istu.edu
ArticleName	The eastern vector of Russian ferrous metallurgy: realities and opportunities
ArticleAuthor	S. P. Petrov
ArticleAuthorData	Institute of Economics and Industrial Engineering, Siberian Branch of the Russian Academy of Sciences (Novosibirsk, Russia) S. P. Petrov, Сand. Eng., Head of the Dept. of Applied Regional Studies, Leading Researcher, petrov.s.p@mail.ru
Casting and Metal Science
ArticleName	Kinetics of structural transformations of compacted graphite iron melts during heating and cooling
ArticleAuthors	D. A. Gurtovoy, A. G. Panov
ArticleAuthorsData	KAMAZ (Naberezhnye Chelny, Russia) D. A. Gurtovoy, Cand. Eng., Consultant to the Deputy General Director for Automotive Components Yaroslavl State Technical University (Yaroslavl, Russia) A. G. Panov, Dr. Eng., Associate Prof., Prof., Dept. of Materials Technology, Standardization, and Metrology, Doctor of Engineering Sciences, panov.ag@mail.ru
Tubemaking
ArticleName	Study of the effect of deformation rate and temperature on the energy and power parameters of the stainless steel billet piercing process in a two-high piercing mill with guide rollers
ArticleAuthors	K. A. Usanov, Ya. I. Kosmatskiy, V. N. Eremin, A. A. Korsakov, Ya. E. Zalavin, D. V. Mikhalkin
ArticleAuthorsData	TMK Chelyabinsk Tube Rolling Plant (branch) (Chelyabinsk, Russia) K. A. Usanov, Chief Engineer TMK Research Center (Moscow, Russia) Ya. I. Kosmatskiy, Dr. Eng., Director of the Subdivision – Deputy General Director for Research, yaroslav.kosmatskiy@tmk-group.com A. A. Korsakov, Cand. Eng., Head of the Seamless Pipe Department Ya. E. Zalavin, Cand. Eng., Head of the Technological Process Modeling Laboratory, yakov.zalavin@tmk-group.com D. V. Mikhalkin, Head of the Screw Rolling Laboratory TMK, Chelyabinsk, Russia V. N. Eremin, Cand. Eng., Chief Specialist
Heating and Heat Treatment
ArticleName	Methods for step-quenching of Kh12M high-alloy steel
ArticleAuthors	S. N. Suleymanova, I. G. Gamdullayeva, A. J. Mansimov, B. B. Musurzayeva
ArticleAuthorsData	Azerbaijan Technical University (Baku, Azerbaijan) S. N. Suleymanova, Cand. Eng., Associate Prof., seyyade.suleymanova@aztu.edu.az I. G. Gamdullayeva, Cand. Eng., Associate Prof., ilhame.hemdullayeva@aztu.edu.az A. J. Mansimov, Cand. Eng., Associate Prof., akif.mensimov@aztu.edu.az B. B. Musurzayeva, Senior Lecturer, beture.musurzayeva@aztu.edu.az
Control and Management on Technological Processes
ArticleName	Development of a multimodal control system for process monitoring of steel flanges based on a robotic complex
ArticleAuthors	K. V. Litsin, S. N. Baskov, A. A. Bystrov, R. A. Kryachkov, A. A. Aksenov
ArticleAuthorsData	South Ural State University (National Research University) (Chelyabinsk, Russia) K. V. Litsin, Cand. Eng., Associate Prof., k.litsin@rambler.ru S. N. Baskov, Cand. Eng., Associate Prof., baskovsn@susu.ru A. A. Bystrov, Student, lexabystrovv@mail.ru R. A. Kryachkov, Student, kryachkov_roma26@mail.ru A. A. Aksenov, Student, aksenalex12@gmail.com
Industrial Engineering
ArticleName	Implementation of a calculation and analytical method for rationing metal consumption within the framework of intra-industry cooperation in the production of cold-formed pipes
ArticleAuthors	Y. I. Kosmatskiy, D. N. Lysov, E. N. Kondratyev, N. V. Gorbunov, A. A. Tyurin, T. V. Dvornikova
ArticleAuthorsData	TMK Research Center (Moscow, Russia) Y. I. Kosmatskiy, Dr. Eng., Branch Office Director – Deputy General Director for Research, yaroslav.kosmatskiy@tmk-group.com D. N. Lysov, Head of the Economic Research Department, lysovdn@tmk-group.com E. N. Kondratyev, Senior Researcher, egor.kondratev@tmk-group.com N. V. Gorbunov, Head of the Sector, nv.gorbunov@tmk-group.com A. A. Tyurin, Head of the Metal Consumption Rates Sector, aleksey.tyurin@tmk-group.com TMK Pipe Metallurgical Company (Moscow, Russia) T. V. Dvornikova, Deputy Head of Department, tatyana.dvornikova@tmk-group.com

Journals → Chernye Metally → 2026 → #6

Journals

CIS Iron and Steel Review

Museums