JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia.

A. V. Vydrin, Dr. Eng., Chief Researcher, Laboratory of Longitudinal Rolling
D. N. Lysov, Head of the Dept. of Economic Research, e-mail: lab-pio@rosniti.ru

JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia¹ ; South Ural State University, Chelyabinsk, Russia²:
E. N. Kondratiev, Junior Researcher, Dept. of Economic Research¹, Postgraduate Student, Dept. of Economics and Finance², e-mail: kondratjev@rosniti.ru

JSC Taganrog Metallurgical Plant, Taganrog, Russia:
A. A. Puzikov, Head of the Bureau of Rationing of the Technical Department

This article discusses the issues of the correlation of theoretical provisions on the sphere of metal use planning and the practical implementation of scientific principles in direct economic practice. Existing rationing methods are analyzed in detail, the most advanced of them, the calculation and analytical method, is identified. It is indicated that this method is implemented only with the help of mathematical modeling. The basis for evaluating the issues of practical implementation is a case study on the development of JSC "Russian Research Institute of the Pipe Industry" tools with a high level of automation and allowing JSC "Taganrog Metallurgical Plant" to solve the problem of scientifically and technically justified calculation of the planned metal consumption in the production of pipe metal products at a pipe rolling mill. Premium Quality Finishing (PQF) continuous mill. The normative and instructive documents regulating this type of activity are given. The process of creating tools for standardizing metal consumption in the form of software products, common to all such works, is characterized. The non-stationary requirements for the process of creating tools, caused by the conditions of TAGMET JSC, are characterized. The emphasis in the material is on describing the features of the accounting policy, its changes, PJSC "Pipe Metallurgical Company" and JSC "Taganrog Metallurgical Plant" in the field of metal consumption rationing, through the chronology of the implementation of these features in software and methodological support. The dynamics of the process of introducing tools into the practice of the plant's specialists and the influence of subjective and objective factors on this process is traced. The results obtained from the implementation, which are an improved process of normalization, are reflected. It also indicates the progressive influence of the optimization of one process on the "adjacent" elements of the management structure.

1. Tarnovskaya Yu. S. Resource management at the enterprise: a methodology for introducing a rationing system. Voprosy upravleniya. 2015. No. 2. pp. 89–92.
2. Baturova N. V. Improvement of organization of material resources rationing at an industrial enterprise. MIR (Modernizatsiya. Innovatsii. Razvitie). 2010. No. 1. pp. 39–40.
3. Baturova N. V. The role of resource rationing in the organization of production at modern engineering enterprises. Aktualnye voprosy ekonomicheskikh nauk. 2014. No. 37. pp. 116–120.
4. Pyshmintsev I. Yu., Lysov D. N., Kondratyev Е. N., Dvornikova Т. V. Genesis of sectoral regulation of metal consumption rationing in the pipe industry. Stal. 2021. No. 1. pp. 62–67.
5. Stevenson M., Hendry L. C., Kingsman B. G. A review of production planning and control: The applicability of key concepts to the make-to-order industry. International Journal of Production Research. 2005. No. 5. pp. 869–898.
6. GOST 14.322–83. Rate setting expenditure for materials. Basic rules. Introduced: 01.01.1984. Moscow: Standartinform, 2009.
7. Regulations on the organization of deliveries of steel pipes by theoretical weight. Available at: http://www.libussr.ru/doc_ussr/usr_10880.htm (accessed: 12.08.2022).
8. Stepanov V. I. Rationing of material resources consumption: tutorial. Moscow: Izdatelskiy tsentr «Akademiya», 2009. 176 p.
9. Baev I. А., Lysov D. N., Dvornikova Т. V. Methods for optimal planning of material resources in the production of pipes. Vestnik YuUrGU. Seriya: Ekonomika i menedzhment. 2016. No. 1. pp. 104–112.
10. Evdokimov D. К., Pokaraev G. М. Rationing of material resources. Moscow: Ekonomika. 1988. 189 p.
11. Mikhaylovskaya I. I., Lysov D. N. Mathematical model for calculation of raw materials consumption in the production of steel pipes. Stal. 2005. No. 11. pp. 143–145.
12. Mikhaylovskaya I. I., Lysov D. N., Grekhov А. I., Dvornikova Т. V. Automated rationing system in pipe production. Stal. 2011. No. 2. pp. 101–104.
13. Mikhaylovskaya I. I. On the issue of creating an automated rationing system in pipe production. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2008. No. 4. pp. 79–82.
14. Ceremonial launch of continuous tube mill PQF took place at TAGMET. Available at: https://www.tmk-group.ru/PressReleases/show/718 (accessed: 04.09.2018).
15. Shaybakova L. F., Nesterov D. N. Innovative solutions JSC Pipe Metallurgical Company. Upravlenets. 2013. No. 1. pp. 29–33.
16. GOST 34.003–90. Information technology. Set of standards for automated systems. Terms and definitions. Introduced: 01.01.1992. Moscow: Standartinform, 2009.
17. Stepanov V. I. Experience in rationing the consumption of materials for new product samples using a computer. Moscow: Central Research Institute of Information and Feasibility Studies for Logistics (TsNIITEIMS), 1984. 42 p.
18. Vydrin А. V., Shirokov V. V. Theoretical foundations for improvement of the pipe dimensions accuracy during rolling on a continuous mill. Vestnik YuUrGU. Seriya: Metallurgiya. 2011. No. 14. pp. 81–86.
19. Pyshmintsev I. Yu., Kuznetsov V. I., Samkova N. P., Krivosheev А. А. Mastering the production of hot-rolled seamless pipes in the PQF mill line of the 10 3/4˝ pipe-rolling plant of JSC TAGMET using lubricants and deoxidizing materials from foreign companies. Metallurg. 2012. No. 8. pp. 65–71.
20. Wrobel K. Analiza i doskonalenie procesu produkcji rur z wspawanymi sondami. Silesian University of Technology, Faculty Organization and Management. 2020. pp. 101–107.
21. Michalski K., Wrobel K. Application of selected methods and tools for improving the pipe production process with welded probes. Scientific Papers of Silesian University of Technology. Organization and Management Series. 2020. No. 148. pp. 471–481.
22. Wu C. Y., Jin X. L., Zhou Y. M. Recent progress of induction heating technology in Baosteel. IOP Conference Series: Materials Science and Engineering. 2018. pp. 1–4.
23. Lysov D. N., Geraskina O. A., Terekhova N. A., Kondratyev E. N. et al. The program for the normalization of metal consumption in the production of pipes on the PQF mill in PJSC "TAGMET": No. 2019662692. Certificate of state registration of the computer program No. 2019663691 Russian Federation. Applied: 15.10.2019. Published: 22.10.2019.
24. GOST R 50278–92. Drill pipes with weld-on tool joints. Specifications. Introduced: 16.09.1992. Moscow: Standartinform, 2010.