TimkenSteel produces blooms on “Jumbo” caster designed by SMS group for wide range of steel grades
06.05.2015, 17:57
TimkenSteel has successfully commissioned its vertical continuous caster in Canton, Ohio, U.S.A. The first heat was successfully cast in 2014. TimkenSteel is presently ramping up production to full capacity.
The new facility features special equipment for casting high-quality blooms. This vertical-type caster has been designed to process a wide range of steel grades, including plain, low-alloyed and high-strength carbon steels, Mo-, Cr- and Ni-alloyed tool steels as well as high-performance bearing steels.
The caster was designed, manufactured and supplied by SMS Concast. It has an annual production capacity of one million tons of special steel grades. This vertical caster is the heart of a quarter-billion dollar investment by TimkenSteel in its Faircrest Steel Plant. The caster measures 80 meters from the top of the ladle turret down to the foundations in the basement. The “Jumbo” caster is designed to produce for two bloom sizes: 460 x 610 millimeters and 280 x 430 millimeters.
“In combination with the new ladle treatment station, the caster will not only boost the production capacity of the Faircrest plant by 25 percent. It will also facilitate the production of a wider range of large-diameter bars,” explains SMS Concast CEO Luis Hernandez.
The unique design requirements and the exacting process variables asked for very close collaboration between the international teams of TimkenSteel and SMS Concast throughout the entire project time.
Currently, the engineering teams of TimkenSteel and SMS are preparing hot commissioning of the plant. “We aim to gradually ramp up production to 60 percent over the course of 2015 and to reach full capacity by the middle of 2016,” says Tom Moline, Vice President of Manufacturing at TimkenSteel. “The quality of the blooms produced so far exceeds our expectations. The caster will increase not only our capacity, but also our efficiency.”
The vertical “Jumbo” caster at TimkenSteel produces blooms of high quality
Based on SMS group information
Other company news
- 19.07.2018 For its tandem cold mill, PAO Severstal again relies on the modernization expertise of SMS group
- 10.07.2018 Vizag Steel Plant successfully commissions new bloom & round combi-caster from SMS Concast
- 05.07.2018 exlabesa group commissions SMS group to supply two light-metal extrusion presses
- 14.06.2018 350,000 tons per year of galvanized steel strip for the Chinese construction and home appliances industries
- 14.06.2018 Yongfeng Group Ltd. invests in casting technology for the production of demanding SBQ steel grades
- 26.04.2018 Celsa Barcelona chooses direct oscillation drive from SMS Concast for the upgrade of their beam blank caster with a new strand
- 12.04.2018 TMK-ARTROM starts production on new heat treatment line for pipes supplied by SMS group
- 12.04.2018 Constellium expands aluminum casthouse capacity in Dĕčín, Czech Republic, with Hertwich Engineering homogenizing furnace
- 29.03.2018 Maanshan Iron and Steel orders heavy section mill from SMS group
- 26.03.2018 MMK to implement comprehensive revamp of hot strip mill 2500 with SMS group


