Journals →  Chernye Metally →  2015 →  #3

Chernye Metally


The No. 3 issue of "Chernye metally" journal is opened by its usual section "Iron and Steel News of the World".


The next section "Iron and Steel Production" includes 5 publications.


The specialists of the Z.I. Nekrasiv Institute of Ferrous metallurgy have investigated the technologies for ladle iron desulfurization. Comparison of two technologies of magnesium injection (magnesium mix with limestone and grained magnesium without additives) has been accompanied by examination of sulfur entering a converter, of slag forming parameters and of resulfurization possibilities.


S.I. Shakhov, A. S. Smolyakov, G.I. Nikolaev from VNIIMETMASH have presented the results of modernization of bloom and slab continuous casting machines in order to expand dimension and grade range, metal quality improvement and productivity rise. It is shown that reconstruction of the existing continuous casters will cost cheaper by 8-10 times comparing with purchasing the new ones.


The next publication is devoted to 75th anniversary of Magnitogorsk GIPROMEZ and written by its general director Yu. Tverskoy. He describes the main events of the company's history, its current achievements and development prospects.


A.A. Gerasimova and A.G. Radyuk from the National University of Science and Technology "MISiS" have displayed in their article the problems of billet surface quality improvement via coating of working surface of narrow walls of a thick-walled mould via gas-thermal method. It leads to decrease of amount of longitudinal, transversal and net cracks on the surface of cast slabs.


E.A. Chernyshov, A.D. Romanov and E.A. Romanova from Nizhniy Novgorod State Technical University have observed the new metallurgical technologies for production of high-strength shipbuilding steels and responsible components made of these steels. The effect of alloying elements, conditions of heat treatment and thermomechanical processing on physical and mechanical properties of such steels is shown.


The translated section includes also 5 large papers.


The specialists form Mining Institute (Leoben) and voestalpine Stahl company have examined features and limits of operation of blast furnace stoves, taking into account up-to-date ecological requirements. Computer fluid-dynamic (CFD) simulation allows to establish the optimal operating conditions.


Publication of the specialists from Salzgitter Flachstahl company and the Institute of Industrial Researches (VDEh) is devoted to measurement of slab surface temperature. Calculated and experimental data of this temperature are compared.


H. Barthold et al. has analyzed the universal surfacial model in cold rolling at Angritz Sundwig rolling mills; it is built according to the modular principle and can be applied for all rolling mills.


K. Serin and H.-J. Pehle from SMS Meer have investigated service life of tools in seamless tube production. Wear, deformation and crack propagation in plugs are examined and practical recommendations for minimization of these defects are given.


The paper "Mathematical model of a quenching process" includes study of quenching of wheel rims for high-speed trains in China. The specialists of LOI Thermprocess displayed that the proposed model allows to exclude pilot operations before and during putting into practice after transition to a new kind of products.


You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Iron and steel news of the world
Development of metallurgy in Russia and CIS
ArticleName Technology of ladle iron desulphurization
ArticleAuthors A. F. Shevchenko, I, A. Manachin, A. M. Shevchenko.

Nekrasov Institute of Ferrous Metallurgy (Dnepropetrovsk, Ukraine):

A. F. Shevchenko, Dr. Eng., Senior Scientific Fellow
I. A. Manachin, Junior Scientific Fellow
A. M. Shevchenko, Post-graduate Student
Е-mail (common):

ArticleName Modernization of section and bloom continuous casters for expanding of dimension and grade range of cast billets, improvement of their quality and rise of productivity
ArticleAuthors S. I. Shakhov, A. S. Smolyakov, G. I. Nikolaev.

All-Russian Scientific and Research Institute of Metallurgical Machinery (Moscow, Russia):

S. I. Shakhov, Cand. Eng., Leading Scientific Fellow
A. S. Smolyakov, Dr. Eng., Head of Department
G. I. Nikolaev, Cand. Eng., Leading Scientific Fellow
Е-mail (common):

ArticleName 75 years of technological engineering
ArticleAuthor Yu. A. Tverskoy.
ArticleName Improvement of billet surface quality via coating application
ArticleAuthors A. A. Gerasimova, A. G. Radyuk

National University of Science and Technology “MISiS” (Moscow, Russia):

A. A. Gerasimova, Cand. Eng., Ass. Prof.
A. G. Radyuk, Dr. Eng., Leading Scientific Fellow, e-mail:

ArticleName Development of metallurgical production technologies and fabrication of responsible products from high-strength ship-building steels
ArticleAuthors E. A. Chernyshov, A. D. Romanov, E. A. Romanova.

Nizhniy Novgorod State Technical University named after R. E. Alekseev, Nizhniy Novgorod, Russia

E. A. Chernyshov, Dr. Eng., Prof.
A. D. Romanov, Head of the Scientific & Research Laboratory
E. A. Romanova, Post-Graduate
Е-mail (common):

Iron and steelmaking
ArticleName Operational blast stove limits with respect to environmental requirements
ArticleAuthors J. Rieger, Ch. Weiβ, B. Rummer.

Montanuniversität Leoben (Leoben, Austria):

J. Rieger, Mag. Eng., Dr. Min., Chair of Processing Equipment for Environment Protection, Е-mail:
Ch. Weiβ, Dr. Eng., Prof., Chair of Processing Equipment for Environment Protection

Voestalpine Stahl GmbH Linz (Linz, Austria):
B. Rummer, Mag. Eng., Blast Furnace Equipment Dept.

Continuous casting
ArticleName Lamp Strand surface temperature tracking inside the first segment of a slab caster
ArticleAuthors M. Schäperkötter, P. Müller, S. Roβius, T. Lamp

Salzgitter Flachstahl GmbH (Salzgitter, Germany):

M. Schäperkötter

P. Müller

S. Roβius


VDEh Institute of Industrial Researches (Düsseldorf, Germany):

T. Lamp, e-mail:

ArticleName Universal flatness model for process optimization in cold rolling mills
ArticleAuthors Ch. Bartholdt, F. Kopin, M. Jelali

Andritz Sundwig GmbH (Hemer, Germany):

Ch. Bartholdt, Head of Rolling Mills Technological Dept., e-mail:
F. Kopin, Head of Rollng Mills


Technical High School Köln (Cologne, Germany):
M. Jelali, Prof., Dr., Head of the Chair of Measuring Technics and Mechatronics

ArticleName Improved service life for hot rolling tools in seamless tube plants
ArticleAuthors K. Serin, H. J. Pehle

SMS Meer GmbH (Mönchengladbach, Germany):

K. Serin, Dr. Eng., Tube Plant Technollogies, e-mail:
H. J. Pehle, Dr. Eng., Tube Plant Technollogies

Heat treatment and coating
ArticleName Mathematical model of a quenching process
ArticleAuthors F. Gerwin, D. Schröder

LOI Thermprocess GmbH (Essen, Germany):

F. Gerwin, Mag. Eng.
D. Schröder, Dr.

Company news
ArticleName Alliance of competencies
ArticleAuthor B. Dahmen
ArticleName Steel – the pasis for mobility and energy concepts of the future
ArticleAuthor F. M. Androsch
Journals →  Chernye Metally →  2015 →  #3