Tsvetnye Metally
The subjects of "Tsvetnye Metally” (Non-ferrous metals) journal (October, 2015) are traditional: non-ferrous metal ore benefication, rare and light metals, noble metals and alloys, composite coatings, material science. This journal illustrates the issues of theory and practice of production and processing of non-ferrous metals, complex use of crude ore, economics and management of production.
This year is the 85-th anniversary of a Chair of Casting Process Technology (National University of Science and Technology «MISiS»), including two scientific schools: «Innovation casting technologies» and «Phase transformations and development of alloys on the basis of non-ferrous metals». The specialists of this chair wrote a number of articles for this issue.
The item «Benefication» includes the article about the sampling of overflows and lump copper-nickel converter matte.
The article by the authors from the D. Mendeleev University of Chemical Technology of Russia tells about the process of electrochemical oxidation of Ce (III) – Ce (IV) ions in nitric acid solutions for the purpose of further separation from accompanying REM.
The article by E. I. Boev and M. A. Glagoleva shows the results of the testing of use of cathode-luminophore KFL-544 (КФЛ-544) for the production of image converter tube screens. The obtained data are the evidence of its availability (according to the characteristics) regarding the imported luminophore R-43 (Р-43).
The article, included in the section «Composite materials and multifunctional coatings», tells about the magnesium oxide and hydroxyapatite coating, obtained by plasma electrolytic oxidation on magnesium alloy surface. This article shows the results of research of phase and element composition, morphology and anti-corrosion properties of coatings.
Fast neutron reactors are the basis of the global atomic power engineering. Metallic fuel, based on U – Mo, U – Zr, (U, Pu) – Zr alloys, is traditionally considered as a nuclear fuel for fast neutron reactors. The article by D. P. Shornikov shows the basic research results of porous metallic nuclear fuel on the basis of uranium and molybdenium alloys with zirconium. There is considered the possibility of application of high-voltage electropulse consolidation for obtaining of uranium alloy tablets.
The article by the authors from Nizhniy Novgorod tells about the modern aspects of application of neutron-absorbent corrosion-resistant steels and alloys in nuclear engineering units. Introduction of certain amount of gadolinium in steels and alloys significantly increases the ability of materials to absorb neutrons during the provision of construction reliability due to saving of high technological, physical-mechanical and corrosion properties of basic material. As a result of offered complex researches and testings, there will be created the basis of wide application of gadolinium-containing materials in prospective designs of neutron absorbers of temporary and centralized storages and containers for transportation of irradiated fuel and in constructions of protection screens of power reactor facilities.
You may find below more details about the issue or book printed or electronic version of the journal.
METAL PROCESSING | |
ArticleName | Technology of art casting obtaining using cold-setting mixture molds with facing ceramic layer |
ArticleAuthors | Gerasimov S. P., Titov A. Yu., Palachev V. A., Konovalov A. N. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia: S. P. Gerasimov, Professor |
ArticleName | Influence of thermomechanical treatment on electrical resistivity and hardening of alloys Al – 0.2% Zr and Al – 0.4% Zr |
ArticleAuthors | Belov N. A., Korotkova N. O., Dostaeva A. M., Akopyan T. K. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia: N. A. Belov, Professor, Director of Engineering Center “Casting Technologies and Materials”, e-mail: nikolay-belov@yandex.ru
Kazakh National Technical University named after K. Satpaev, Almaty, Kazakhstan: A. M. Dostaeva, Doctoral Student of a Chair of Machine-Tool Construction, Material Science and Mechanical Facilities Technology |
ArticleName | Structure and mechanical properties of alloy Al – 3% B flats, obtained by liquid-phase method |
ArticleAuthors | Samoshina M. E., Belov N. A., Alabin A. N., Chervyakova K. Yu. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia: M. E. Samoshina, Senior Researcher of Engineering Center “Casting Technologies and Materials”, Assistant Professor of Casting Process Technology Chair |
ArticleName | Technological modes of obtaining a qualitative castings from aluminium alloys by LFC method |
ArticleAuthors | Deev V. B., Kutsenko A. I., Ponomareva K. V., Mishurov S. S. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia: V. B. Deev, Chief Researcher of Engineering Center “Casting Technologies and Materials”, Professor of a Chair of Casting Technologies and Art Material Treatment, e-mail: deev.vb@mail.ru
A. I. Kutsenko, Assistant Professor, Head of Scientific Research Department K. V. Ponomareva, Senior Lecturer of a Chair of Material Science, Casting and Welding Engineering |
ArticleName | Eutectic alloys, based on Al – Ca system with scandium addition as a possible alternative to thermally reinforced silumins |
ArticleAuthors | Naumova E. A., Bazlova T. A., Alekseeva E. V. |
ArticleAuthorsData | Bauman Moscow State Technical University, Material Science Chair, Moscow, Russia: E. A. Naumova, Assistant Professor
National University of Science and Technology “MISiS”, Casting Process Technology Chair, Moscow, Russia: |
ArticleName | Calculation analysis of phase diagrams of ternary Al – Ti – X systems in the area of γ-alloys on the basis of titanium aluminide |
ArticleAuthors | Dashkevich N. I., Belov N. A., Beltyukova S. O. |
ArticleAuthorsData | Interdepartmental analytic center, Moscow, Russia: N. I. Dashkevich, Area manager
|
ArticleName | Change of eutectic morphology in Mg – Al – Ca – Mn system alloys in heat treatment process |
ArticleAuthors | Koltygin A. V., Nikitina A. A., Bazhenov V. E. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia: A. V. Koltygin, Assistant Professor, Casting Process Technology Chair, e-mail: misistlp@mail.ru |
ArticleName | Comparison of physical methods of on-line inspection of chemical composition and microstructure of aluminum Al – Mn – Cu alloys |
ArticleAuthors | Udalaya K. R., Belenkiy A. M., Korotkova N. O., Deev V. B. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia: K. R. Udalaya, Applicant for the Degree of Candidate of Science, Chair of Thermal Physics and Ecology of Metallurgical Production, e-mail: kbulgakova2012@gmail.com |
BENEFICATION | |
ArticleName | Development of raw material and product sampling methods with determination of content of non-ferrous and precious metals at concentration and metallurgical enterprises. Part 1 |
ArticleAuthors | Glazatov A. N., Tsemekhman L. Sh. |
ArticleAuthorsData | LLC “Institute Gipronikel”, Saint Petersburg, Russia: A. N. Glazatov, Leading Researcher of Pyrometallurgy Laboratory, e-mail: angla@nikel.spb.su |
NOBLE METALS AND ALLOYS | |
ArticleName | Use of halogen containing noble metal solvents in pressure oxidation technology |
ArticleAuthors | Zolotarev F. D., Aleksandrova T. N., Bogorodskiy A. V., Zhadovskiy I. T. |
ArticleAuthorsData | National Mineral Resources University, Saint Petersburg, Russia: F. D. Zolotarev, Post-Graduate Student (Mineral Concentration Chair), e-mail: fzolot@mail.ru JSC “Irgiredmet”, Irkutsk, Russia: |
LIGHT METALS, CARBON MATERIALS | |
ArticleName | Baked anode design improvement |
ArticleAuthors | Lysenko A. P., Kirov S. S., Selnitsyn R. S., Nalivayko A. Yu. |
ArticleAuthorsData | National University of Science and Technology “MISiS”, Chair of Nonferrous Metals and Gold, Moscow, Russia: A. P. Lysenko, Assistant Professor, e-mail: reikis@yandex.ru |
RARE METALS, SEMICONDUCTORS | |
ArticleName | Electromembrane process for cerium isolation from the bulk concentrate of rare-earth metals |
ArticleAuthors | Kondrateva E. S., Kolesnikov V. A., Gubin A. F., Pozdeev S. S. |
ArticleAuthorsData | D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia: E. S. Kondrateva, Researcher |
ArticleName | The fine-crystalline luminophore Gd2O2S:Tb for image converter tube screens |
ArticleAuthors | Boev E. I., Glagoleva M. A. |
ArticleAuthorsData | LLC “Lyumpeks”, Pereslavl-Zalessky, Russia: E. I. Boev, Technical Director, e-mail: ei.boev@yandex.ru
National Research Nuclear University “MEPhI” (Moscow Engineering Physics Institute), Moscow, Russia: |
COMPOZITES AND MULTIPURPOSE COATING | |
ArticleName | Formation of the composite protective calcium-phosphate coatings on resorbable Mg-alloys |
ArticleAuthors | Gnedenkov S. V., Sinebryukhov S. L., Puz A. V., Mashtalyar D. V. |
ArticleAuthorsData | Institute of Chemistry of Far-Eastern Branch of Russian Academy of Sciences, Vladivostok, Russia: S. V. Gnedenkov, Professor, Deputy Director for Science, Head of Department of Electrochemical Systems and Surface Modification Processes |
MATERIAL SCIENCE | |
ArticleName | Application of powder metallurgy for metal nuclear fuel manufacturing |
ArticleAuthors | Shornikov D. P., Baranov V. G., Nikitin S. N., Tarasov B. A. |
ArticleAuthorsData | Branch Scientific-Research Laboratory 709, National Research Nuclear University “MEPhI” (Moscow Engineering Physics Institute), Moscow, Russia: D. P. Shornikov, Senior Researcher, e-mail: d.p.shornikov@mail.ru |
ArticleName | The possibility of gadolinium application in neutron-absorbent corrosion-resistant steels and alloys for the long-range designs of nuclear engineering |
ArticleAuthors | Dmitriev V. P., Nazarov V. G., Tikhonov V. P., Leushin I. O. |
ArticleAuthorsData | Scientific and Industrial Center “Epsilon”, Nizhny Novgorod, Russia: V. P. Dmitriev, Senior Researcher
Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia: I. O. Leushin, Professor, Head of a Chair “Metallurgical Technologies and Equipment” |