CIS Iron and Steel Review” is the only Russian metallurgical scientific-technical journal in English, publishing materials about whole spectrum of the problems, innovations and news of foreign iron and steel industry.

Published since 2006, volume up to 124 pages, circulation up to 40 copies.

ISSN 2072-0815.

 

Way of the journal distribution - free access to the papers, published with article processing charge (APC).


The mission of this edition is to make foreign specialists aware about scientific and technical researches and development in iron and steel industry in the former USSR countries.


"CIS Iron and Steel Review" journal publishes both separate articles about innovations in the field of iron and steel industry and experience of their putting into practice at metallurgical works, and also complex collections of materials on plants and technological directions. The topics of publications covers whole area of metallurgical production from iron- and steel making, casting and rolling to finishing, heat treatment and coating of metal products. Serious attention is paid in the journal to up-to-date technological processes (such as metal shape memory, superductility, manufacture of large diameter tubes, micro-mills etc.), as well as actual problems of environment protection, resource saving and training of specialists.

 

The features of "CIS Iron and Steel Review" journal are based on publishing materials about up-to-date scientific innovations both national and foreign metallurgists; it allows to compare them demonstrably and to get full information about current state and development tendencies of iron and steel industry in Russia and abroad. Such editorial practice is rather popular among the readership.

 

"CIS Iron and Steel Review" is an expert peer-review edition; its editorial board incorporates leading and respectable scientists and practical specialists of iron and steel industry; peer-reviewing provides excellent expertise of published articles.

 

According to the recent data (2022), CIS Iron and Steel Review journal has the following parameters:

• Quartile 1 (Scimago)

• SJR 0.625

• H index 15

 

Editorial board:
Actual address: Office 617, Leninsky prospect 6, bld. 2
(National University of Science and Technology "MISIS" (MISIS), bld. A), Moscow, 119049 Russia
Mailing address: P.O. Box No. 71, Moscow, 119049, Russia
Phone / Fax: +7 (495) 955-01-75
E-mail: chermet@rudmet.ru
Internet: www.rudmet.ru
 
Founders:
"Ore and Metals” Publishing House
Nosov Magnitogorsk State Technical University

Editorial council:
Editor-in-Chief – Evgeny Tsirulnikov
Deputy Editor-in-Chief – Konstantin Kosyrev
Deputy Editor-in-Chief – Alexander Vorobiev
Responsible Secretary – Elena Rakhmanova


Belenky A. M., Dr. Eng., Prof., North Caucasus Mining and Metallurgical Institute, Vladikavkaz, Russia

Bobarikin Yu. L., Cand. Eng., Ass. Prof., Sukhoi State Technical University of Gomel, Gomel, Belarus

Boriskin O. I., Dr. Eng., Prof., Tula State University (Tula, Russia)

Butorina I. V., Dr. Eng., Prof., St. Petersburg Polytechnical University, St. Petersburg, Russia
Chichenev N. A., Dr. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia
Chukin M. V., Dr. Eng. Prof., Magnitogorsk State Technical University named after G. I. Nosov, Magnitogorsk, Russia

Chumanov I. V., Dr. Eng., Prof., South Ural State University, Zlatoust, Russia
Elansky D. G., Cand. Eng., Ass. Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia

Galkin S. P., Dr. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia
Goli-Oglu E. A., Cand. Eng., NLMK DanSteel, Frederiksværk, Denmark
Illarionov I. E., Dr. Eng., Prof., Chuvash State University named after I. N. Ulyanov, Cheboksary, Russia
Kaputkina L. M., Dr. Phys.-Math., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia
Kazakov A. A., Dr. Eng., Prof., "Thixomet" Ltd., St. Petersburg, Russia
Kharchenko A. S., Dr. Eng., Assoc. Prof., Nosov Magnitiogorsk State Technical University, Magnitogorsk, Russia
Kolikov A. P., Dr. Eng., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia
Kolokoltsev V. M., Dr. Eng., Prof., Magnitogorsk State Technical University, Magnitogorsk, Russia
Konovalov S. V., Dr. Engh., Prof., Siberian State Industrial University, Novokuznetsk, Russia
Korchunov A. G., Dr. Eng., Prof., Magnitogorsk State Technical University, Magnitogorsk, Russia
Kosyrev K. L., Dr. Eng., Prof., Scientific and Production Association CNIITMASH, Moscow, Russia
Kushnarev A. V., Dr. Eng., "Metalloinvest", Nizhniy Tagil, Russia
Leushin I. O., Dr. Eng., Prof., Nizhny Novgorod State Technical University, Nizhniy Novgorod, Russia

Mazur I. P., Dr. Eng., Prof., Lipetsk State Technical University, Lipetsk, Russia

Matveeva T. N., D. Eng., Research Institute of Comprehensive Exploitation of Mineral Resources of Russian Academy of Sciences, Moscow, Russia

Muntin A. V., Cand. Eng., Vyksa Steel Works, Vyksa, Russia

Pelevin A. E., D. Eng., Prof., Ural State Mining University, Ekaterinburg, Russia

Potravnyy I. M., D. Econ., Prof., Russian University of Economics named after G.V. Plekhanov, Moscow, Russia
Rakhmanova E. Yu., "Ore and Metals" Publishing House, Moscow, Russia
Savenok A. N., Minsk Bearing Plant, Minsk, Belorussia
Serebryakov An. V., Cand. Eng., Pervouralsk New Pipe Plant, Pervouralsk, Russia
Sidorova E. Yu., D. Econ., Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia
Shapovalov A. N., Cand. Eng., Assoc. Prof., Novotroitsk affiliate of the National University of Science and Technology "MISIS", Novotroitsk, Russia
Sultanguzin I. A., Dr. Eng., Prof., National Research University "Moscow Power Engineering Institute", Moscow, Russia;
Travyanov A. Ya., Cand. Eng., Ass. Prof., National University of Science and Technology "MISIS" (MISIS), Moscow, Russia
Tsirulnikov E. V., Editor-in-Chief, "Ore and Metals" Publishing House, Moscow, Russia
Volynkina E. P., Dr. Eng., Prof., Novokuznetsk, Russia
Vorobiev A. G., D. Econ., "Ore and Metals" Publishing House, Moscow, Russia

Vydrin A. V., Dr. Eng., Prof., Russian Scientific and Research Institute of Tube and Pipe Industry (RosNITI), Chelyabinsk, Russia

Yatsenko E. A., Dr. Eng., Prof., Platov South-Russian State Polytechnic University, Novocherkassk, Russia

Zyuban N. A., Dr. Eng., Prof., Volgograd State Technical University, Volgograd, Russia

 

Foreign members of the editorial council:
Prof. Dr.-Ing. Wolfgang Bleck, Director of IEHK Ferrous Metallurgy Chair and Department of RWTH Aachen, Germany

Evgeny A. Goli-Oglu, PhD, NLMKDanSteel, Frederiksværk, Denmark

Dr. Yakov Gordon, Director - Ironmaking Technologies, HATCH, Missisauga, Ontario, Canada
Prof. Dr.-Ing. Piotr Scheller, Professor of Institute of Iron and Steel Technology of the Technical university "Bergakademie Freiberg", Germany


Тopic Themes:

- Scientific, research and engineering innovations

- Building and development of metallurgical enterprises

- Ironmaking and steelmaking

- Casting

- Rolling and other metal forming processes

- Heat treatment and application of coatings

- Power engineering and environment protection

- Control, organization and management of production

- Preparation of raw materials

- Coke and chemical production

- Metallurgy and automotive industry

- Foundry production

- Tubemaking

- Heating, heat treatment and refractories

- Metal science and metallography

- Digital technologies

- Economics and finances

- HR policy and labor protection

- Metallurgical history

- Mineral processing

- Chemical technologies

- Machine-building technologies