Journals →  Chernye Metally →  2021 →  #5

Chernye Metally


“Chernye metally” journal No. 5 for 2021 was published.


In the Beneficiation of ores section the authors presented methods, technologies and devices for beneficiation of iron ore raw materials to increase the efficiency of iron concentrate production.


The Rolling and heat treatment section contains articles devoted to thermomechanical processing of sheet metal up to 100 mm thick, cold rolling of a strip, modernization of a roller table of a bloom continuous casting machine. The Metallurgy and metallography section is devoted to the study of iron-based amorphous alloys properties, fatigue tests of welded joints of 32G2 and 40KhN steels and study of effect of hardness on the impact toughness of car castings. In the Ecology and recycling section, articles are devoted to processing of liquid sludge and production of grinding bodies from rejected rail steels.


The issue ends with the Machine-building technologies section containing articles devoted to the study of combining the processes of drawing and extrusion in the manufacture of cylindrical products.


Also published congratulations on the anniversaries of Professor Oleg Igorevich Boriskin, a member of the editorial board of the Ferrous Metals journal, and Professor Vasily Efimovich Roshchin, Chief Researcher of the chair for Pyrometallurgical Processes of South Ural State University.


Please find more details below, or order your printed or electronic version of the Journal.

Mineral Processing
ArticleName Increasing the efficiency of iron-ore dressing by separation in an alternative magnetic field
ArticleAuthor A. E. Pelevin

Ural State Mining University (Ekaterinburg, Russia):

A. E. Pelevin, Dr. Eng., Prof., Dept. of Mineral Processing, e-mail:

ArticleName Substantiation of efficiency and ecological safety of technologies and cyclone plants of a new generation in iron ore dressing and processing
ArticleAuthors T. A. Oleynik, V. I. Lyashenko, T. V. Chekushina, M. O. Oleynik

Kryvyi Rih National University (Krivoy Rog, Ukraine):

T. A. Oleynik, Dr. Eng., Prof., Head of Mineral Dressing Dept., e-mail:
M. O. Oleynik, Cand. Eng., Associate Prof., Mineral Dressing Dept., e-mail:

Ukrainian Research and Design Institute for Industrial Technology (Zhavti Vody, Ukraine):

V. I. Lyashenko, Cand. Eng., Head of Dept., e-mail:


Research Institute of Comprehensive Exploitation of Mineral Resources of the RAS (Moscow, Russia):
T. V. Chekushina, Cand. Eng., Associate Prof., Leading researcher, e-mail:

Rolling and Heat treatment
ArticleName Production of structural steel heavy plates up to 100 mm by TMCP with final accelerated cooling for wind generators and bridgebuilding. Part 1
ArticleAuthor E. A. Goli-Oglu

NLMK Dansteel A/S (Frederikswerk, Denmark):

E. A. Goli-Oglu, Cand. Eng., Process Developer, e-mail:

ArticleName Automated system for analysis and calculation of cold rolling strip parameters. Message 1
ArticleAuthors A. I. Bozhkov, D. A. Kovalev, S. S. Degtev, R. I. Shulgin

Lipetsk State Technical University (Lipetsk, Russia):
A. I. Bozhkov, Cand. Eng., Prof., Metal Forming Dept., e-mail:

Novolipetsk Steel – NLMK (Lipetsk, Russia):

D. A. Kovalev, Cand. Eng., Head of Technology Development Dept., e-mail:
S. S. Degtev, Cand. Eng., Head of Dept. of Technical Development of Sales, e-mail:
R. I. Shulgin, Graduate Student, Specialist of the Regional Sales Directorate, e-mail:

ArticleName Modernization of a rolling table before gas cutting machine of bloom CCM
ArticleAuthors N. V. Davydov, A. V. Nefedov, N. A. Chichenev

National University of Science and Technology “MISiS” – Novotroitsk branch (Novotroitsk, Russia):

N. V. Davydov, Student, e-mail:
A. V. Nefedov, Cand. Ped., Associate Prof., Deputy Director, e-mail:


National University of Science and Technology “MISiS” (Moscow, Russia):

N. A. Chichenev, Dr. Eng., Prof., Technological Equipment Engineering Dept., e-mail:

Metal Science and Metallography
ArticleName Endurance limit and mechanism of fracture of friction welded joints of exploration drill pipes in the conditions of multi-cycle fatigue
ArticleAuthors A. S. Atamashkin, E. Yu. Priymak, E. S. Tulibaev, A. V. Stepanchukova

Orenburg State University (Orenburg, Russia):

A. S. Atamashkin, Graduate Student


Drilling Equipment Plant (Orenburg, Russia):

E. Yu. Priymak, Cand. Eng., Associate Prof., Head of the Metallurgy and Heat Treatment Laboratory, e-mail:
E. S. Tulibaev, Chief Designer of the Drilling Tool Development Bureau
A. V. Stepanchukova, Cand. Eng., Leading Metal Eng.

ArticleName Properties of amorphous Fe-based alloy
ArticleAuthors O. I. Boriskin, G. A. Nuzhdin, V. Yu. Vvedenskiy

Tula State University (Tula, Russia):
O. I. Boriskin, Dr. Eng., Prof., Director of Polytechnic Institute


National University of Science and Technology “MISiS” (Moscow, Russia):
G. A. Nuzhdin, Cand. Eng., Associate Prof., e-mail:
V. Yu. Vvedenskiy, Cand. Phys.-Math., Associate Prof.

ArticleName Influence of components and 20GL steel microstructure hardness on impact toughness of car castings
ArticleAuthors R. A. Bogdanov, Yu. M. Markova

Bryansk State Technical University (Bryansk, Russia):

R. A. Bogdanov, Cand. Eng., e-mail:


National Research Center "Kurchatov Institute" – Central Reseach Institute of Structural Materials "Prometey" (St. Petersburg, Russia):

Yu. M. Markova, Leading Eng., e-mail:

Ecology and Recycling
ArticleName Rotor type plants for liquid slag processing
ArticleAuthors B. L. Demin, L. A. Smirnov, Yu. V. Sorokin, E. N. Shcherbakov

Ural Institute of Metals (Ekaterinburg, Russia):

B. L. Demin, Cand. Eng., Executive Director of SRC Processing and Use of Man-made Wastes, e-mail:
L. A. Smirnov, Dr. Eng., Academician of the Russian Academy of Sciences, Research Supervisor, Chief Researcher of the Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences
Yu. V. Sorokin, Cand. Eng., Senior Researcher, Scientific Consultant
E. N. Shcherbakov, Leading Engineer

ArticleName Development of technology for production of grinding bodies with improved performance properties from the rail steels rejection
ArticleAuthors A. A. Umanskiy, A. S. Simachev, L. V. Dumova

Siberian State Industrial University (Novokuznetsk, Russia):

A. A. Umanskiy, Cand. Eng., Director of the Center for Collective Use “Materials Science”, e-mail:
A. S. Simachev, Cand. Eng., Deputy Director of the Center for Collective Use “Materials Science”, e-mail:
L. V. Dumova, Senior Lecturer, Dept. of Management and Industry Economics, e-mail:

Machine-building technologies
ArticleName Manufacturing of cylindrical articles with a thick bottom and thin wall
ArticleAuthors S. N. Larin, V. I. Platonov, A. N. Isaeva, P. V. Romanov.

Tula State University (Tula, Russia):

S. N. Larin, Dr. Eng., Prof., Dept. “Mechanics of Plastic Shaping”, e-mail:
V. I. Platonov, Cand. Eng., Associate Prof.
P. V. Romanov, Student

Scientific and Production Union “Splav” named after A. N. Ganichev (Tula, Russia):

A. N. Isaeva, Engineer

ArticleName Study of dependence of hardness of steel cylindrical parts on technological parameters
ArticleAuthors O. V. Pantyukhin, S. A. Vasin

Tula State University (Tula, Russia):
O. V. Pantyukhin, Cand. Eng., Associate Prof., e-mail:
S. A. Vasin, Dr. Eng., Prof., e-mail:

Journals →  Chernye Metally →  2021 →  #5