• Acquire

Chernye Metally

100th anniversary of the “Metal forming” dept. of Ural federal university
ArticleName
Evaluation of the influence of technological parameters of screw piercing on the shell quality and process stability
ArticleAuthors
O. A. Panasenko, D. Sh. Nukhov, A. O. Khalezov
ArticleAuthorsData

JSC Seversky Tube Works, Polevskoy, Russia:
O. A. Panasenko, Head of the Pipe-Rolling Laboratory of the Research Center, e-mail: PanasenkoOA@stw.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
D. Sh. Nukhov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: d.s.nukhov@urfu.ru
A. O. Khalezov, Postgraduate Student, Dept. of Metal Forming, e-mail: alekssanja633@mail.ru

ArticleName
Investigation of the rolling angle effect on energy-power and speed parameters of screw piercing using computer simulation
ArticleAuthor
D. A. Pavlov
ArticleAuthorData

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
D. A. Pavlov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: d.a.pavlov@urfu.ru

ArticleName
Analysis of the stress-strain state when straightening asymmetric profiles
ArticleAuthors
S. V. Mylnikov, R. F. Iskhakov, D. L. Shvarts
ArticleAuthorsData

JSC NPP Mashprom, Ekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia2:

S. V. Mylnikov, Technical Expert1, Postgraduate Student2
R. F. Iskhakov, Cand. Eng., Associate Prof., Director on Engineering Technology1, Dept. of Metal Forming2, e-mail: r.f.iskhakov@urfu.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
D. L. Shvarts, Dr. Eng., Associate Prof., Head of the Dept. of Metal Forming

ArticleName
Improvement of the accuracy of calibrated rolled products based on a change in the drawing channel geometry
ArticleAuthors
S. O. Nepryakhin, M. G. Martynov
ArticleAuthorsData

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
S. O. Nepryakhin, Cand. Eng., Associate Prof., Institute of New Materials and Technologies, e-mail: s.o.nepriakhin@urfu.ru
M. G. Martynov, Master Student

ArticleName
Processing non-dimensional pipe sections to obtain cold-rolled strip
ArticleAuthors
G. V. Shimov, Yu. N. Loginov, N. I. Bushueva
ArticleAuthorsData

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:

G. V. Shimov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: g.v.shimov@urfu.ru

N. I. Bushueva, Research Engineer, Scientific Laboratory of Metal Forming, e-mail: n.i.bushueva@urfu.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia1 ; M. N. Mikheev Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia2:

Yu. N. Loginov, Dr. Eng., Prof., Dept. of Metal Forming1, Leading Researcher2, e-mail: j.n.loginov@urfu.ru

ArticleName
Investigation of the stress-strain state at the boundary between materials during rolling of a layered composite
ArticleAuthor
D. R. Salikhyanov
ArticleAuthorData

Institute of Mechanical Engineering, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia2:

D. R. Salikhyanov, Cand. Eng., Associate Prof., Researcher1, Institute of New Materials and Technologies2, e-mail: salenhall@gmail.com

ArticleName
Role of surface phenomena in deformation and fracture of gas turbine blades and stamping tools under intense mechanical and thermal loading
ArticleAuthors
B. N. Guzanov, N. B. Pugacheva, E. Yu. Slukin, S. M. Nikiforova
ArticleAuthorsData

Russian State Vocational Pedagogical University, Ekaterinburg, Russia:

B. N. Guzanov, Dr. Eng., Prof., Head of the Dept. of Engineering and Vocational Training in Mechanical Engineering and Metallurgy, Institute of Engineering and Pedagogical Education, e-mail: guzanov_bn@mail.ru


Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia:
N. B. Pugacheva, Dr. Eng., Associate Prof., Chief Researcher, Laboratory of Micromechanics of Materials, e-mail: nat@imach.uran.ru


Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
E. Yu. Slukin, Cand. Eng., Associate Prof., Institute of New Materials and Technologies, e-mail: slukin@cniim-ekt.ru
S. M. Nikiforova, Cand. Eng., Associate Prof., Institute of New Materials and Technologies, e-mail: s.m.nikiforova@urfu.ru

Rolling and Heat treatment
ArticleName
Experimental testing of radial-shear rolling to obtain a deformed alloy of the Co – Cr – Mo system
ArticleAuthors
S. P. Galkin, Yu. V. Gamin, T. Yu. Kin, S. A. Kostin
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia:

S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: glk-omd@yandex.ru
Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: y.gamin@mail.ru
T. Yu. Kin, Postgraduate Student, Dept. of Metal Forming, e-mail: tatianakin@mail.ru

 

JSC Plant of High-Quality Alloys, Moscow, Russia:

S. A. Kostin, Development Director, e-mail: kostin@ezks.ru

ArticleName
Investigation of the influence of hardening medium parameters during heat treatment of grinding balls from rail steel on the quality of their microstructure and hardness
ArticleAuthors
A. A. Umansky, A. S. Simachev, L. V. Dumova, S. O. Safonov
ArticleAuthorsData

Siberian State Industrial University, Novokuznetsk, Russia:

A. A. Umansky, Dr. Eng., Associate prof., Director of the Institute of Metallurgy and Materials Science, e-mail: umanskii@bk.ru
A. S. Simachev, Cand. Eng., Director of the Center for Collective Use “Materials Science”, e-mail: simachev_as@mail.ru
L. V. Dumova, Leading Engineer, Center for Collective Use "Materials Science", e-mail: doumova@bk.ru
S. O. Safonov, Postgraduate Student

10th anniversary of the department of Design Engineering and Operation of Metallurgical Machines and Equipment of Nosov Magnitogorsk State Technical University
ArticleName
Immersive technologies in industrial equipment design
ArticleAuthors
T. V. Usataya, L. V. Deryabina, M. V. Androsenko, A. G. Korchunov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

T. V. Usataya, Cand. Ped., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment, e-mail: usatayatv@gmail.com
L. V. Deryabina, Cand. Ped., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment
M. V. Androsenko, Cand. Eng., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment
A. G. Korchunov, Dr. Eng., Prof., Head of the Dept. of Design and Operation of Metallurgical Machines and Equipment

ArticleName
Prediction of durability of a drum pelletizer based on the strength criterion of non-driven support rollers at the design and operation stage
ArticleAuthor
M. G. Slobodyansky
ArticleAuthorData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
M. G. Slobodyansky, Cand. Eng., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment, e-mail: m.slobodianskii@gmail.com

ArticleName
Study of the wear resistance of guide fittings rollers of PJSC MMK`s section mills to replace them with domestic analogues
ArticleAuthors
N. Sh. Tuteryakov, A. S. Savinov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
N. Sh. Tyuteryakov, Cand. Eng., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment, e-mail: n.tyuteryakov@magtu.ru
A. S. Savinov, Dr. Eng., Associate Prof., Director of the Institute of Metallurgy, Mechanical Engineering and Materials Processing, e-mail: savinov_nis@mail.ru

ArticleName
Study of 3D printing of mechanical engineering parts using steel powder with TRIP-effect
ArticleAuthors
D. V. Konstantinov, A. G. Korchunov, E. M. Ogneva, M. A. Polyakova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

D. V. Konstantinov, Cand. Eng., Specialist of the 1st Category of Management for International Activities, e-mail: const_dimon@mail.ru
A. G. Korchunov, Dr. Eng., Prof., Head of the Dept. of Design and Operation of Metallurgical Machines and Equipment
E. M. Ogneva, Cand. Eng., Specialist of the 1st Category of Management for International Activities
M. A. Polyakova, Dr. Eng., Prof., Dept. of Materials Processing Technology

ArticleName
Refinement of methodology for analytical assessment of contact interaction of elements of rolls - strip systems in four-roll stands
ArticleAuthors
A. V. Antsupov (Jr.), A. V. Antsupov, V. P. Antsupov, E. S. Ryskina
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

A. V. Antsupov (Jr.), Cand. Eng., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment, e-mail: a.antcupov@gmail.com
V. P. Antsupov, Dr. Eng., Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment
E. S. Ryskina, Cand. Eng., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment

 

Bauman Moscow State Technical University, Moscow, Russia:

A. V. Antsupov, Dr. Eng., Associate Prof., Dept. of Mechanical Engineering Technologies

Casting and Foundry production
ArticleName
Production of thin-walled cast iron castings of frame-cellular and ordered honeycomb structures
ArticleAuthors
I. O. Leushin, L. I. Leushina, O. S. Koshelev, P. A. Gorokhov
ArticleAuthorsData

Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia:

I. O. Leushin, Dr. Eng., Prof., Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru
L. I. Leushina, Cand. Eng., Associate Prof,, Dept. of Metallurgical Technologies and Equipment, e-mail: kafmto@mail.ru
O. S. Koshelev, Dr. Eng., Prof., Dept. of Mechanical Engineering Technological Complexes
P. A. Gorokhov, Graduate Student, Dept. of Metallurgical Technologies and Equipment, e-mail: pavel_goroxov@mail.ru