Chernye Metally
| 100th anniversary of the “Metal forming” dept. of Ural federal university | |
| ArticleName | Evaluation of the influence of technological parameters of screw piercing on the shell quality and process stability |
| ArticleAuthors | O. A. Panasenko, D. Sh. Nukhov, A. O. Khalezov |
| ArticleAuthorsData | JSC Seversky Tube Works, Polevskoy, Russia:
Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: |
| ArticleName | Investigation of the rolling angle effect on energy-power and speed parameters of screw piercing using computer simulation |
| ArticleAuthor | D. A. Pavlov |
| ArticleAuthorData | Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: |
| ArticleName | Analysis of the stress-strain state when straightening asymmetric profiles |
| ArticleAuthors | S. V. Mylnikov, R. F. Iskhakov, D. L. Shvarts |
| ArticleAuthorsData | JSC NPP Mashprom, Ekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia2: S. V. Mylnikov, Technical Expert1, Postgraduate Student2
Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: |
| ArticleName | Improvement of the accuracy of calibrated rolled products based on a change in the drawing channel geometry |
| ArticleAuthors | S. O. Nepryakhin, M. G. Martynov |
| ArticleAuthorsData | Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: |
| ArticleName | Processing non-dimensional pipe sections to obtain cold-rolled strip |
| ArticleAuthors | G. V. Shimov, Yu. N. Loginov, N. I. Bushueva |
| ArticleAuthorsData | Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: G. V. Shimov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: g.v.shimov@urfu.ru N. I. Bushueva, Research Engineer, Scientific Laboratory of Metal Forming, e-mail: n.i.bushueva@urfu.ru
Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia1 ; M. N. Mikheev Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia2: Yu. N. Loginov, Dr. Eng., Prof., Dept. of Metal Forming1, Leading Researcher2, e-mail: j.n.loginov@urfu.ru |
| ArticleName | Investigation of the stress-strain state at the boundary between materials during rolling of a layered composite |
| ArticleAuthor | D. R. Salikhyanov |
| ArticleAuthorData | Institute of Mechanical Engineering, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia2: D. R. Salikhyanov, Cand. Eng., Associate Prof., Researcher1, Institute of New Materials and Technologies2, e-mail: salenhall@gmail.com |
| ArticleName | Role of surface phenomena in deformation and fracture of gas turbine blades and stamping tools under intense mechanical and thermal loading |
| ArticleAuthors | B. N. Guzanov, N. B. Pugacheva, E. Yu. Slukin, S. M. Nikiforova |
| ArticleAuthorsData | Russian State Vocational Pedagogical University, Ekaterinburg, Russia: B. N. Guzanov, Dr. Eng., Prof., Head of the Dept. of Engineering and Vocational Training in Mechanical Engineering and Metallurgy, Institute of Engineering and Pedagogical Education, e-mail: guzanov_bn@mail.ru Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia: Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: |
| Rolling and Heat treatment | |
| ArticleName | Experimental testing of radial-shear rolling to obtain a deformed alloy of the Co – Cr – Mo system |
| ArticleAuthors | S. P. Galkin, Yu. V. Gamin, T. Yu. Kin, S. A. Kostin |
| ArticleAuthorsData | National University of Science and Technology MISIS, Moscow, Russia: S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: glk-omd@yandex.ru
JSC Plant of High-Quality Alloys, Moscow, Russia: S. A. Kostin, Development Director, e-mail: kostin@ezks.ru |
| ArticleName | Investigation of the influence of hardening medium parameters during heat treatment of grinding balls from rail steel on the quality of their microstructure and hardness |
| ArticleAuthors | A. A. Umansky, A. S. Simachev, L. V. Dumova, S. O. Safonov |
| ArticleAuthorsData | Siberian State Industrial University, Novokuznetsk, Russia: A. A. Umansky, Dr. Eng., Associate prof., Director of the Institute of Metallurgy and Materials Science, e-mail: umanskii@bk.ru |
| 10th anniversary of the department of Design Engineering and Operation of Metallurgical Machines and Equipment of Nosov Magnitogorsk State Technical University | |
| ArticleName | Immersive technologies in industrial equipment design |
| ArticleAuthors | T. V. Usataya, L. V. Deryabina, M. V. Androsenko, A. G. Korchunov |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: T. V. Usataya, Cand. Ped., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment, e-mail: usatayatv@gmail.com |
| ArticleName | Prediction of durability of a drum pelletizer based on the strength criterion of non-driven support rollers at the design and operation stage |
| ArticleAuthor | M. G. Slobodyansky |
| ArticleAuthorData | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: |
| ArticleName | Study of the wear resistance of guide fittings rollers of PJSC MMK`s section mills to replace them with domestic analogues |
| ArticleAuthors | N. Sh. Tuteryakov, A. S. Savinov |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: |
| ArticleName | Study of 3D printing of mechanical engineering parts using steel powder with TRIP-effect |
| ArticleAuthors | D. V. Konstantinov, A. G. Korchunov, E. M. Ogneva, M. A. Polyakova |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: D. V. Konstantinov, Cand. Eng., Specialist of the 1st Category of Management for International Activities, e-mail: const_dimon@mail.ru |
| ArticleName | Refinement of methodology for analytical assessment of contact interaction of elements of rolls - strip systems in four-roll stands |
| ArticleAuthors | A. V. Antsupov (Jr.), A. V. Antsupov, V. P. Antsupov, E. S. Ryskina |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: A. V. Antsupov (Jr.), Cand. Eng., Associate Prof., Dept. of Design and Operation of Metallurgical Machines and Equipment, e-mail: a.antcupov@gmail.com
Bauman Moscow State Technical University, Moscow, Russia: A. V. Antsupov, Dr. Eng., Associate Prof., Dept. of Mechanical Engineering Technologies |
| Casting and Foundry production | |
| ArticleName | Production of thin-walled cast iron castings of frame-cellular and ordered honeycomb structures |
| ArticleAuthors | I. O. Leushin, L. I. Leushina, O. S. Koshelev, P. A. Gorokhov |
| ArticleAuthorsData | Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia: I. O. Leushin, Dr. Eng., Prof., Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru |
