• Acquire

Chernye Metally

Rolling and other Metal Forming Processes
ArticleName
Feasibility demonstration of normative models for sheet-rolling shop productivity. Message 1
ArticleAuthors
A. R. Fastykovsky, N. V. Martyushev, A. I. Musatova, I. A. Savchenko, A. I. Karlina
ArticleAuthorsData

Siberian State Industrial University, Novokuznetsk, Russia

A. R. Fastykovsky, Dr. Eng., Associate Prof., Head of the Dept. of Metal Forming and Metal Science, e-mail: fastikovsky@mail.ru

A. I. Musatova, Lecturer, Institute of Additional Education, e-mail: musatova-ai@yandex.ru

 

Tomsk Polytechnic University, Tomsk, Russia
N. V. Martyushev, Cand. Eng., Associate Prof., Dept. of Materials Science, e-mail: martjushev@tpu.ru


Moscow City University, Moscow, Russia.

I. A. Savchenko, Dr. Soc., Associate Prof., Prof., e-mail: Savchenko-514@mgpu.ru


Moscow State University of Civil Engineering, Moscow, Russia
A. I. Karlina, Cand. Eng., Researcher, e-mail: karlinat@mail.ru

ArticleName
Determination of parameters for step-by-step bending of thin sheet metal
ArticleAuthors
N. A. Chichenev, A. O. Karfidov, M. V. Vasilyev, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology “MISIS”, Moscow, Russia

N. A. Chichenev, Dr. Eng., Prof., Dept. of Process Equipment Engineering, e-mail: chich38@mail.ru
A. O. Karfidov, Head of the Dept. of Process Equipment Engineering, e-mail: a.korf@mail.ru
M. V. Vasilyev, Senior Lecturer, Dept. of Process Equipment Engineering, e-mail: mv@karfidovlab.com
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Computer-Aided Engineering and Design, e-mail: ch-grafika@mail.ru

60th anniversary of the Dept. of Metallurgical Equipment of Lipetsk State Technical University
ArticleName
Analysis of the influence of wear of working parts on the efficiency of crushing process in a hammer crusher
ArticleAuthors
D. A. Vlasenko, A. A. Kharitonenko, A. V. Bocharov, A. L. Chelyadina, M. A. Shipulin
ArticleAuthorsData

Donbass State Technical University, Alchevsk, Russia
D. A. Vlasenko, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: VlsnkDA@yandex.ru

 

Lipetsk State Technical University, Lipetsk, Russia
A. A. Kharitonenko, Cand. Phys.-Math., Associate Prof., Dept. of Metallurgical Equipment, e-mail: aax.in@mail.ru

A. L. Chelyadina, Senior Lecturer, Dept. of Metallurgical Equipment, e-mail: mo@stu.lipetsk.ru

 

Lipetsk State Technical University, Lipetsk, Russia1 ; NLMK, Lipetsk, Russia2
A. V. Bocharov, Associate Prof., Dept. of Metallurgical Equipment1, Specialist of the Dept. of Personnel Training and Development2, e-mail: alor_fr@mail.ru

 

Lipetsk State Technical University, Lipetsk, Russia1 ; SMS Group Ltd., Lipetsk, Russia2
M. A. Shipulin, Associate Prof., Dept. of Metallurgical Equipment1, Deputy Chief Engineer2, e-mail: mikhail.shipulin2@sms-group.com

ArticleName
An integrated approach to improve the quality of solid fuel in sintering production by improving the DChG 900.700 four-roll crusher
ArticleAuthors
D. A. Vlasenko, A. P. Zhiltsov, R. S. Melezhik, A. A. Kharitonenko
ArticleAuthorsData

Donbass State Technical University, Alchevsk, Russia

D. A. Vlasenko, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: VlsnkDA@yandex.ru
R. S. Melezhik, Postgraduate Student, Assistant of the Dept. of Metallurgical Technologies, e-mail: ruslan.melezhik@yandex.ru

 

Lipetsk State Technical University, Lipetsk, Russia

A. P. Zhiltsov, Cand. Eng., Associate Prof., Prof., Dept. of Metallurgical Equipment, e-mail: mo@stu.lipetsk.ru
A. A. Kharitonenko, Cand. Phys.-Math., Associate Prof., Dept. of Metallurgical Equipment, e-mail: aax.in@mail.ru

ArticleName
Optimal planning of maintenance and repairs of multi-component facilities in the iron and steel industry
ArticleAuthors
A. V. Galkin, A. A. Kharitonenko, L. S. Chernyshova, A. V. Bocharov
ArticleAuthorsData

Lipetsk State Technical University, Lipetsk, Russia

A. V. Galkin, Cand. Eng., Associate Prof., Dean of the Faculty of Automation and Informatics, e-mail: galkin_av@stu.lipetsk.ru
A. A. Kharitonenko, Cand. Phys.-Math., Associate Prof., Dept. of Metallurgical Equipment, e-mail: aax.in@mail.ru

 

Center for Corporate Solutions Ltd., Lipetsk, Russia
L. S. Chernyshova, Specialist of the Procurement Contract Management Dept., e-mail: Lidok221196@yandex.ru

 

Lipetsk State Technical University, Lipetsk, Russia1 ; Novolipetsk Metallurgical Plant, Lipetsk, Russia2
A. V. Bocharov, Cand. Eng., Specialist of the Dept. of Personnel Training and Development2, Associate Prof., Dept. of Metallurgical Equipment1, e-mail: alor_fr@mail.ru

ArticleName
Substantiation of design and technological parameters of a rotary-impact shredder for steel crushed shot
ArticleAuthors
A. P. Zhiltsov, E. P. Levchenko, O. I. Akimova, D. A. Vlasenko
ArticleAuthorsData

Lipetsk State Technical University, Lipetsk, Russia

A. P. Zhiltsov, Cand. Eng., Associate Prof., Prof., Dept. of Metallurgical Equipment, e-mail: mo@stu.lipetsk.ru

 

Donbass State Technical University, Alchevsk, Russia
E. P. Levchenko, Cand. Eng., Associate Prof., Prof., Dept. of Technology and Organization of Mechanical Engineering Production, e-mail: levchenkop@yandex.com
O. I. Akimova, Senior Lecturer, Dept. of Mining Energy-Mechanical Systems, e-mail: pavlinenko@yandex.com
D. A. Vlasenko, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: VlsnkDA@yandex.ru

Heat Treatment and Coating Application
ArticleName
The influence of heat treatment of the Kh15Yu5 (Cr15Al5) alloy with an aluminide coating on its thermal and electrical conductivity
ArticleAuthors
V. G. Shmorgun, V. P. Kulevich, A. I. Bogdanov
ArticleAuthorsData

Volgograd State Technical University, Volgograd, Russia

V. G. Shmorgun, Dr. Eng., Prof., Dept. of Materials Science and Composite Materials, e-mail: vgshmorgun@mail.ru
V. P. Kulevich, Cand. Eng., Associate Prof., Dept. of Materials Science and Composite Materials, e-mail: kulevich.vp@gmail.com; mv@vstu.ru
A. I. Bogdanov, Cand. Eng., Associate Prof., Dept. of Materials Science and Composite Materials, e-mail: bogdanov@vstu.ru

Heat Treatment and Metal Science
ArticleName
Structure and mechanical properties of a 132 mm thick welded joint of low-carbon Nb and Nb + Ti heavy plate steel after TM+AcC
ArticleAuthor
E. A. Goli-Oglu
ArticleAuthorData

NLMK DanSteel, Frederiksvaerk, Denmark

E. A. Goli-Oglu, Cand. Eng., e-mail: EGoli-Oglu@yandex.com

10th anniversary of the Dept. of Metallurgical Technologies and Equipment of Nizhniy Novgorod State Technical University n.a. R. E. Alekseev
ArticleName
Control of the “Hub” casting forming modes of steel 30KhNML in sand-clay molds and molds from cold-hardening mixtures
ArticleAuthors
E. I. Yarovaya, I. O. Leushin, A. Yu. Gusev
ArticleAuthorsData

Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia

E. I. Yarovaya, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: helyar@yandex.ru
I. O. Leushin, Dr. Eng., Prof., Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru

 

Russian Federal Nuclear Center of the All-Russian Research Institute of Experimental Physics “Research Institute of Measuring Systems named after. Yu. E. Sedakov”, Nizhny Novgorod, Russia
A. Yu. Gusev, Deputy Chief Designer - Head of Branch Department, e-mail: algus_76@mail.ru

ArticleName
Application of industrial waste in foundry and metallurgical technologies. Experience of the department of Metallurgical Technologies and Equipment
ArticleAuthors
A. N. Grachev, I. O. Leushin, V. A. Korovin, L. I. Leushina
ArticleAuthorsData

Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia

A. N. Grachev, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: alexgra76@mail.ru
I. O. Leushin, Dr. Eng., Prof., Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru
V. A. Korovin, Dr. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: v.korovin2015@yandex.ru
L. I. Leushina, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: kafmto@mail.ru

ArticleName
On the opportunities and prospects of the dept. of Metallurgical Technologies and Equipment in training specialists in additive technologies in the production of iron and steel castings
ArticleAuthors
A. S. Romanov, M. A. Geiko, O. I. Cheberyak, D. S. Margun
ArticleAuthorsData

Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia

A. S. Romanov, Head of the Laboratory, Senior Lecturer, Dept. of Metallurgical Technologies and Equipment, e-mail: romanoffas@yandex.ru
M. A. Geyko, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: mices@bk.ru
O. I. Cheberyak, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment
D. S. Margun, Technician, Dept. of Metallurgical Technologies and Equipment, e-mail: margdm@yandex.ru

Economics and Finances
ArticleName
Situational analysis of business activity of ferrous metallurgy companies from the perspective of an institutional approach
ArticleAuthors
V. G. Kogdenko, N. A. Kazakova
ArticleAuthorsData

National Research Nuclear University MEPHI, Moscow, Russia
V. G. Kogdenko, Dr. Econ., Head of the Dept. of Financial Management

 

Russian University of Economics named after G. V. Plekhanov, Moscow, Russia
N. A. Kazakova, Dr. Econ., Prof., Dept. of Financial and Economic Security, e-mail: axd_audit@mail.ru